[sdiy] tempco contact

[Brett Maddaford]

I mounted mine on the flat face as well in my tb3031 and it seems to be nice
and stable :)

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of
harrybissell at wowway.com
Sent: Friday, 7 December 2007 06:22 
To: gino wong; SDIY
Subject: Re: [sdiy] tempco contact

I mounted mine on the flat side near the center of the package.

That said... it miht be better to mount it glued to the
actual leadframe (five leads) of the device if you can fit it there.
The die will probably be most closely coupled (thermally) to the metal of
the
leadframe.

IMHO, reality may vary. Maybe I should sacrifice one of these to determine
the
die position (it die-d for a good cause ??? :^)

H^) harry



On Thu, 6 Dec 2007 13:18:38 -0500, gino wong wrote
> I am putting a tempco in thermal contact with a 2sc1583.  The cool
> transistor pair that goes in either way).  There are two surfaces 
> that I can mount the resistor on. There is a ling flat side, the biggest
> area on the tran that is on the side and there is a beveled area on
> top.   Should i mount it on the side or the top.  It is for a vco
> function so I need the best functional contact.
> 
> best
> 
> gw
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


Harry Bissell & Nora Abdullah 4eva

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error
please delete the e-mail & notify the system manager.
We reserve the right to scan all e-mail traffic for restricted content
and to monitor all e-mail traffic in general.
The views and opinions expressed in this e-mail are those of the sender 
and do not necessarily reflect the views of the organisation
by whom they are employed, except where the sender expressly
and with authority states them to be so.
This footnote also confirms that this email message
has been checked for the presence of computer viruses and script.
We believe but do not warrant that this e-mail is free from viruses.
Responsibility for virus checking rests entirely with the recipient.
5 at 356
**********************************************************************