[sdiy] tempco contact

[harrybissell at wowway.com]

I mounted mine on the flat side near the center of the package.

That said... it miht be better to mount it glued to the
actual leadframe (five leads) of the device if you can fit it there.
The die will probably be most closely coupled (thermally) to the metal of the
leadframe.

IMHO, reality may vary. Maybe I should sacrifice one of these to determine the
die position (it die-d for a good cause ??? :^)

H^) harry



On Thu, 6 Dec 2007 13:18:38 -0500, gino wong wrote
> I am putting a tempco in thermal contact with a 2sc1583.  The cool
> transistor pair that goes in either way).  There are two surfaces 
> that I can mount the resistor on. There is a ling flat side, the biggest
> area on the tran that is on the side and there is a beveled area on
> top.   Should i mount it on the side or the top.  It is for a vco
> function so I need the best functional contact.
> 
> best
> 
> gw
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


Harry Bissell & Nora Abdullah 4eva