[sdiy] stripper recommendations

[Paul Schreiber]

If you are doing wire-wrap wire, then you *have* to use what is called a 'no 
nick' stripper. This is a precision set of blades/cutters that will not put 
a tiny slice into the wire itself, which will cause failures as the wire is 
wrapped around the posts.

The best type is the OK Industries Model ST-100-2830. It looks pretty funky, 
but it works great! Google around, lots of folks carry it.

Paul S.

----- Original Message ----- 
From: "rdrake" <rdrake at data2action.com>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Sunday, December 02, 2007 6:22 PM
Subject: [sdiy] stripper recommendations


> wire stripper, that is... you didn't think... did you? anyway...
>
> looking for recommendations (and economical US source) for hand wire 
> stripper that will handle 30 gauge or smaller.  smallest my current one 
> does is 28.
>
> thx
> bbob
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>