[sdiy] Tau front panel

[JH.]

 There are several people working on front panels for this project, in 
different form factors.
(If you want me to add a link to your front panel, please send me a mail.)
Here's what I designed for my own board:
http://www.jhaible.heim.at/tau/jh_tau_frontpanel.pdf (19" 1U front panel)
Im using knobs with numbers from 0 ... 10 printed around their skirt (like 
some guitar amps have them), so I only need a single marker at 12 o'clock 
position, instead of tick marks all around the knob.
The front panel is designed to fit into a an enclosure from RS-Components, 
order number 221-9284 and 224-470.
The switches are push buttons from Maplin - I don't know if they have them 
anymore.
If you're interested to get the fpd file, please send me a mail. (Right now, 
the front panel is untested, so I don't know if the dimensions are right. 
You will know that they are tested, as soon as I put up pictures of the 
whole effect with enclosure.)

JH.