[sdiy] Sound kits suitable for a 12 year old?

[John Luciani]

On 8/7/07, Andre Majorel <aym-htnys at teaser.fr> wrote:
> On 2007-08-07 08:33 -0400, John Luciani wrote:
>
> > For woodworking I have the following general rules ---
> >
> >   * If a machine is running you do not come into the shop if you are not
> >     wearing safety glasses.
> >   * Hearing protection is required when any machine other than the drill press
> >      is operating.
> >   * Breathing protection is required when sanding or running the bandsaw.
> >   * Face shield is required for the lathe

> * To remove chips from the bit/milling cutter or near one that is
>   in rotation, use a brush. Never, ever, use your sleeve.

I run the dust collector or vacuum so I have never been in that
situation. You need to real careful even with a brush.

>
> * Drilling holes in some sheet metal that is not in a vice ? Wear
>   thick leather gloves. Better yet, plate armour. :-/

Better yet is do not drill a piece of metal that is not in a vice.
If that drill catches you are trying to hold a propeller!!!

(* jcl *)

-- 
http://www.luciani.org