[sdiy] 2SC1583
dj hohum
djhohum at gmail.com
Fri Aug 3 14:04:31 CEST 2007
Hi Tim,
Sure, that's a fine choice. But that wasn't really what I was asking.
I was asking what pair of "manually matched" single transistors would
you sub. I'm assuming, of course, that manually matched singles are
adequate for the application.
But, in regards to the LM394, I couldn't find them on the mouser site.
Who else besides futurlec carries them?
tnx,
daryl
On 8/3/07, Tim Parkhurst <tim.parkhurst at gmail.com> wrote:
> On 8/2/07, dj hohum <djhohum at gmail.com> wrote:
> > Hi All,
> >
> > Reading the oakley sound 3030 manual it seems like almost any matched
> > pair can be substituted for the 2SC1583. So for non-critical
> > applications what pair of reasonably matched singles would you
> > substitute? The datasheet I have claims an hFE range from 250 to
> > 800!
> >
>
> How about the LM394? hFE range is about 300 to 700 and Futurlec has
> them for under $2. Comes in a DIP package though, so may be difficult
> to fit onto a PCB designed for a different transistor package.
>
> Tim (non-critical) Servo
> --
> "Imagination is more important than knowledge." - Albert Einstein
>
More information about the Synth-diy
mailing list