[sdiy] Front Panel Polish? `~~`

[Edward King]

If it were me and the panel was all metal, I would go for powder coating.

Cheap as chips, very shiny finish, very tough and professional looking.

EK


----- Original Message ----- 
From: "Casio Rapman" <casiorapman at hotmail.com>
To: <analogue at hyperreal.org>
Cc: <synth-diy at dropmix.xs4all.nl>
Sent: Thursday, April 19, 2007 7:38 PM
Subject: [sdiy] Front Panel Polish? `~~`


> I've got a couple synths with metal surfaces where the majority of the 
> surface is shiny but there are a few dull spots as well as a few 
> scratches.  Some of these are on the front panels where there's lettering, 
> some aren't.  What do you guys recommend to restore things so they're nice 
> and shiny / looking like new?   I notice a wipe with windex makes them 
> look great.... til the Windex evaporates.  Is there some kind of really 
> safe metal polish I could use that won't effect things long term and won't 
> come off when you touch it?
>
> Thanks!
>
> _________________________________________________________________
> The average US Credit Score is 675. The cost to see yours: $0 by Experian. 
> http://www.freecreditreport.com/pm/default.aspx?sc=660600&bcd=EMAILFOOTERAVERAGE
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy