[sdiy] center tapped pots?

[ezion]

Try ordering directly from Bourns.
Met those guys on the musik-messe:"But sure you can still order large
quantities, like 50 pcs from us too..."
Guess a little competition from China changed their way of thinking.
They where willing to match Alfa's price for a order of only 1K 11mm
square plastic pots too.
Cool for the moment, but makes me wonder when the Euro comes crashing down.

Theo


On 4/8/07, peter edwards <synth at casperelectronics.com> wrote:
> Howdy y'all...
> I'm looking for a couple 100K, dual, center tapped pots and can't
> seem to find them anywhere. I found some manufacturers but no small
> quantity distributors. Anybody have any leads?
>
> Maybe there's an alternate method for achieving my goal and I don't
> need a center tapped pot, but I can't think of one...
>
> If anyone is interested in giving me some pointers, please read on.
> I'm building a vocal FX unit using the PT2399 echo IC and the HT8950
> vocal processor IC (pitch changer).
> The basic layout is as follows:
> One vocal signal splits through two op-amps. The inverted signals are
> sent one to the echo and the second to the pitch changer. Then the
> output from the two circuits are mixed together, inverted again and
> sent to the output.  So you have 1 input signal that goes through two
> FX circuits in parallel. What I want to do is include a control so
> one of the two wet signals can be routed into the other, pre-mixer.
> This is what I would use the dual, center tapped pot for. I would
> wire the center tapped lug to the left lug and ground both so that
> way the volume control window would be silence from 7-12
> o'clock....Silence to full volume from 12-5 o'clock (does that make
> sense??) The second pot would be reversed. So that way when the
> control is all the way counter clockwise it would send the echo into
> the pitch changer. As you turn the knob clockwise it would fade to
> silence. At the center position, there would be no signal. Then as
> you turn it clockwise past the center position the signal from pitch
> changer into the echo would increase.
>
> any thoughts for alternate methods or obvious flaws in my design?????
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>