AW: AW: [sdiy] Re: [sdiy-interim] EPROM Armageddon?

[Ullrich Peter]

Hi Ken!

>>Maybe you have also a Digilec 804? 
>>I could read my chips and send you the binaries.

>It was the Z80 based Microprofessor and accessories.

I see. As far as I remember this was the Z80 evaluation board with a 
little keyboard and display on it - right?
http://www.pasta.franken.de/mpf1map.htm

Here is the problem that the eprom is quite exposed to light - so if
there was only a paper sticker on it and not a metallic sticker the
contents of the eprom were very unsafe.

As I have no microprofessor board (but I used one in school) I can't 
help you direct but indirectly.

There are a lot of fanpages on the internet for this board.

And this page http://members.lycos.co.uk/leeedavison/z80/mpf1/index.html 
has the eprom binary in a zipfile:
http://members.lycos.co.uk/leeedavison/z80/mpf1/mpf1.zip

So if you still have the board you can bring it to life by programming
an eprom! But be sure to put a metallic sticker on the eprom window!

Ciao
Peter
        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------

Peter Ullrich I Hardware Engineer, Research & Development
Phone +43 (0)50 811 2265 I Mobile +43 (0)664 628 2265
eFax +43 (0)50 811 992265 I peter.ullrich at kapsch.net

Kapsch TrafficCom AG I Wagenseilgasse 1 I A-1120 Vienna I Austria
http://www.kapschtraffic.com/ I http://www.kapsch.net/
Registered at Commercial Court in Vienna FN223805a
Registered Office Vienna

   .oooO          
   (   )   Oooo.   ----------------------------------------------------
    \ (    (   )   Private Homepage: http://home.pages.at/pullrich
-----\_)----) /--------------------------------------------------------
           (_/


The information contained in this e-mail message is privileged and
confidential and is for the exclusive use of the addressee. The person
who receives this message and who is not the addressee, one of his
employees or an agent entitled to hand it over to the addressee, is
informed that he may not use, disclose or reproduce the contents thereof.