[sdiy] Groupbuy for THAT300/320/340/2180B (Current list)

[Andre Majorel]

On 2006-09-09 23:02 +0200, Joachim wrote:

> I have started a little collection of DIY things for which you can use
> these chips:
> 
> 300:
> - Your own fancy Moog filter clone
> - Your own dual expo converter (e.g. think of a Korg MS-02 clone)
> - Oakley Supper Ladder, new version
>
> 320:
> - New version of the Yves Usson Arp 4072 Filter with 3 x THAT320 
> instead of the 6 x SA798
> http://yusynth.net/Modular/EN/ARPVCF/index.html
> I will do that when I got my 320's.

But as far as I can see, the PCB is laid out for 2SA798.

> 340:
> - 1 x for the MOTM-485 GX-1 filter
      http://synthtech.com/motm485.html

  - 1 per MSEG (not guaranteed, as the board is laid out for
    THAT 140)
    http://www.oldcrows.net/~patchell/synthmodules/multisegenv.html

  - poor man's OTA (see above)

  - remplacement for CA3096 (not identical !)

  - Bergfotron VCO ?

> 2180B:
> - 2 x for the Papareil Synth Labs Dual VCA
> http://m.bareille.free.fr/modular1/vca_dbx/mb_dbxvca.htm
> - 3 x for the Gyraf SSL-4000 clone (a compressor)
> http://www.gyraf.dk/gy_pd/ssl/ssl.htm
> - 2 x for Juergen Haible transient gate:
> http://jhaible.heim.at/transient/jh_trangate_sch_p1.pdf
> (In the schematic you see 2181, but as there are no trimmers there,
> the 2180 is probably better)
> - Replacement for the DBX2150 without the need for trimmers (factory 
> trimmed)

  - 4 per Oakley VC mixer http://oakleysound.com/vcmix.htm

  - 1 per Oakley VC-ADSR/VCA http://oakleysound.com/adsr.htm

-- 
André Majorel <URL:http://www.teaser.fr/~amajorel/>
Do not use this account for regular correspondence.
See the URL above for contact information.