[sdiy] 2-4 pin internal wire->wire connectors

[Harry Bissell Jr]

I'm using Molex C-Grid (Centi-Grid)
connectors.

They are a wire/wire (and I think) board/wire
system up to maybe 12 - 18 positions max.
.1" spacing. Pins are not real expensive, and the
cheap crimp tool is about $40 (cheap)

I like them a lot.

H^) harry

--- Nicholas Gregorich <nicksdsu at mac.com> wrote:

> Anyone have a suggestion for connectors for internal
> cable wiring?  I  
> would like something that locks, is polarized, and
> comes in wire to  
> wire (free floating) as well as wire to PCB and
> maybe even wire to  
> wire panel mount.  Something that's somewhat
> standard or at least  
> going to be around for a while is good and I'm
> looking to be somewhat  
> cost effective.  Minimum 2 contacts, up to 4, 6, or
> 8 too.
> 
> I spent some time looking at the Mouser catalog but
> there are so many  
> choices!
> 
> Thanks.
> 
> Nick.
>