SV: [sdiy] silver glue

[karl dalen]

Take a scalpel  and ripp up some copper tracks from some old PCB laying
around, quite easy, start to tear at a copper corner, then take some superglue
and glue the track over the dammaged track ten solder at both ends.

http://en.wikipedia.org/wiki/Scalpel

KD

--- Antti Pitkämäki <anpitkam at hotmail.com> skrev:

> Hi,
> 
> I'm repairing my Farfisa Professional organ, which has one broken frequency 
> divider. I know someone who has a spare-part Farf Pro organ, and I soldered 
> one divider out of his Farfisa. The dividers are actually very small circuit 
> boards, that are soldered to the main board like normal components are 
> soldered, they sort of stick out of the main board. Anyways, in the process 
> of soldering one of the mini divider boards out of the organ, the foil of 
> the mini board ripped off, which means I can't solder it to my organ anymore 
> :( However, a friend of mine recommended that I'd try to "replace" the 
> missing foil with "silver glue". Could some guru please answer this 
> question: Would my friend's recommandation be a good idea? Or would it be 
> much more sensible to try to solder another mini divider board out of the 
> spare-parts organ, so that the board would remain unbroken? (which I 
> wouldn't want to do since I don't know the owner of the organ very well, 
> he's a friend of a friend and it would be embarrassing to call him again 
> about his spare-part organ :P )
> 
> Antti Pitkämäki
> 
> 
>