[sdiy] Cap part number help please

[Altitude]

 http://www.onlineconversion.com/electric_capacitance.htm

I made too many mistakes in the past

__________________________________________
"Setting the RESONANCE to high level might prove interesting" - Roland
SH-101 Manual

www.no-ho.com
www.teknatural.com

 
 
-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl] On Behalf Of Ray Wilson
Sent: Tuesday, November 28, 2006 8:31 AM
To: synth-diy at dropmix.xs4all.nl; Matthias.Herrmann at jeppesen.com
Cc: Sam Ecoff
Subject: Re: [sdiy] Cap part number help please

Slight correction...

(0.001 uF = 1n = 1000 pF)



----- Original Message -----
From: <Matthias.Herrmann at jeppesen.com>
To: <synth-diy at dropmix.xs4all.nl>
Cc: "Sam Ecoff" <secoff at execpc.com>
Sent: Tuesday, November 28, 2006 12:52 AM
Subject: Re: [sdiy] Cap part number help please


> owner-synth-diy at dropmix.xs4all.nl wrote on 11/28/2006 08:31:01 AM:
> 
>> hi All...
>> 
>> I'm looking for some .001uF 
>> caps for the EFM VCF-12 filter I'm 
>> building, I have some WIMA 
>> boxed caps, but the leads 
>> don't reach 
>> between the holes on the 
>> PCB. I've spent a couple of hours on 
>> Mouser's site, but I was 
>> unable to find something 
>> suitable (didn't 
>> look at the ceramics as I 
>> assume they aren't the best 
>> choice for this 
>> application). 
>> Thanks,
>> 
>> Sam E.
> 
> look for 1000 pF instead, i got hundrets of matches.
> (0.001 uF = 1n = 100 pF)
> 
> you'll find mica, x7r ceramic etc...
> 
> matthias
>