[sdiy] wurlitzer question

[Michael Bacich]

On May 16, 2006, at 10:59 AM, NicholasFaith wrote:

> I have an old wurlitzer electric piano and it doesn't have an  
> output but it
> does have a speaker out, is there anything I could do to convert  
> this to a
> line so I can run it through a mixer?

Which model Wurlitzer is it?  Most of them had headphone outputs,  
since they were originally designed to be used in multi-student piano  
teaching labs.  The headphone outputs are usually OK for connecting  
directly to an amp or line input.

If you have one of the plastic-body models, it will definitely have a  
headphone jack.  It's located underneath the unit.  Earlier models  
had their jacks either on the side of the case, or on the left-side  
cheek block next to the left end of the keyboard.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060516/6a711418/attachment.htm>