[sdiy] mounting boards to front panels

[harrybissell]

Joergen Bergfors  (Bergfotron) uses brass front panels and solders
the standoffs to them.  Maybe you saw that ???

If you wanted to use glue... I would use a standard two-part
epoxy.  Clean the surfaces very well, and test one first. I'd worry that
the rotational stress of tightening the screws might eventually break
the
bond, but you'd have to try it. 

I would avoid trying cyanoacrylic (crazy) glue for this

H^) harry

Ian Maslen wrote:
> 
> Hi all
> 
> I'm just finishing up my first few modules in eurorack format and
> planning on mounting the pcbs to the front panel using metal standoffs
> glued to the back of the front panels.  I'm sure I saw the method
> described on someones website but can't find it now.  Anyone know
> where I might have seen that (unless I dreamt the whole thing) or
> could recommend what kind of adhesive to use.
> 
> Thanks for any pointers,
> Ian