[sdiy] Renes Tube VCO

[harry bissell]

if I was serious (not :^) the silicone tape would be an excellent
choice. We used it in an instrument that ran nearly 700C in temperature...
and it survived

H^) harry

John Mahoney wrote:
> At 10:35 PM 5/2/2006, you wrote:
>> Also its hardly practical to glue 3046s to a tube. :-)
>>
>> nah... you hold the 3046 to the tube with a rubber band. You can
>> tell by the odor when it is up to temperature :^P
>>
>> H^) harry
>
> If one really wanted to do this, there are foam rubber rings made for 
> "damping" vibration of tubes. My Fender guitar amp came with some 
> installed by the factory.
>
> Or maybe you could use silicone tape, I think it can withstand pretty 
> high temps.
> -- 
> john
>
>
>