[sdiy] LM13700

[Ray Wilson]

>From the spec sheet. Note 4 seems applicable for stabilizing an unused device. You can probably skip applying bias (500uA) to the amplifier bias pin though.

Electrical Characteristics (Note 4) (Continued)

Note 4: These specifications apply for VS = ±15V, TA = 25°C, amplifier bias current (IABC) = 500 µA, pins 2 and 15 open unless otherwise specified. The inputs to the buffers are grounded and outputs are open.

Note 5: These specifications apply for VS = ±15V, IABC = 500 µA, ROUT = 5 kO connected from the buffer output to -VS and the input of the buffer is connected
to the transconductance amplifier output.

Cheers

Ray


  ----- Original Message ----- 
  From: Laurie Biddulph 
  To: Synth-DIY 
  Sent: Saturday, March 25, 2006 4:08 AM
  Subject: [sdiy] LM13700


  What is the best thing to do with unused pins on the LM13700? ie I am not using one of the OTAs nor either of the buffers

  Best Regards

  (Mr) Laurie Biddulph
  Mobile: 0404 846 943

  Elby Designs
  ABN: 70 022 727 605
  http://www.elby-designs.com

  This e-mail and any files transmitted with it are confidential and intended for the addressee only.
  If you are not the addressee you may not copy, forward, disclose or otherwise use it, or any part
  of it, in any form whatsoever. If you have received this e-mail in error please notify the sender
  and ensure that all copies of this e-mail and any files transmitted with it are deleted. Any views
  or opinions represented in this e-mail are solely those of the author and do not necessarily
  represent those of Elby Designs. Although this e-mail and its attachments have been scanned for the
  presence of computer viruses, Elby Designs will not be liable for any losses as a result of any
  viruses being passed on.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060325/b795313c/attachment.htm>