[sdiy] VCO bleed through to other modules

[Jim Bob]

Yes, it does.. the positive has a +s the neg has a -S and the ground  has both.  When I got my PS they were all connected.. like the +  and +S are wound together w/ bare wire, - and -S wound together, and  ground and the +S, -S are all wound together.  Its some thick  guage wire and its all soldered in place.   I just left it  that way.
  
  Scott

Ian Fritz <ijfritz at earthlink.net> wrote:  At 08:40 AM 3/24/06, you wrote:
>I'd say you're right, because I dont even know what the sense terminal 
>is!  Ive just got +,-, and G from each module going directly to the 
>terminals on the P.S.  Each module has the beads and bypass caps on the 
>PCB, but nothing big.

Does the supply have sense (+S and -S) terminals?  If so, are they connected? 



		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060324/61f8dcda/attachment.htm>