[sdiy] VCO bleed through to other modules

[Jim Bob]

I had the power for the modules daisy chained from one module to the  next.  I thought that might  be the problem, so I hooked the  VCO directly to the power supply (disconnected the bi-n-tic to get it  out of the equation for now), and it made no difference!!  Wiring  the noise module directly to the power supply made the crosstalk more  quite, but not much.


			
---------------------------------
Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060323/bb7f7af1/attachment.htm>