[sdiy]Re: [sdiy] Looking for ribbon controllers

[rdrake]

This is a Force Sensing Resistor in strip format... from what i read, this would be good for preassure sensors (harder you press, the lower the resistance)... but i'm not sure if it varies resistance in relation to location on the strip, which is what i usually think of as a ribbon controller.

i have one of the doepfer controllers, and like it fine... wish the controller itself was under 19" is my main complaint.   i also have a PCB for the tellun Sword of Kahless, which is supposed to address some shortcomings other folks have seen...


>----- ------- Original Message ------- -----
>From: frederic.piron at cota.be
>To: hughes_david_j at btopenworld.com
>Sent: Tue, 21 Mar 2006 15:22:54
>
>http://www.phidgetsusa.com/cat/viewproduct.asp? 
>category=5000&subcategory=5210&SKU=91004
>
>
>Le 21-mars-06 à 14:29, David J. Hughes a écrit :
>
>> Hello all,
>>
>> I'm looking for a source of ribbon controllers.
>Any suggestions?  
>> I've tried
>> Penny and Giles but they seem expensive.
>>
>> Regards
>>     David
>>
>> -- 
>> Infection Music Limited.		       
>http:// 
>> www.infectionmusic.co.uk
>>
>> This e-mail and any files transmitted with it are
>confidential and  
>> intended
>> for the addressee only. If you are not the
>addressee you may not copy,
>> forward, disclose or otherwise use it, or any
>part of it, in any form
>> whatsoever. If you have received this e-mail in
>error please notify  
>> the
>> sender and ensure that all copies of this e-mail
>and any files	
>> transmitted
>> with it are deleted. Any views or opinions
>represented in this e- 
>> mail are
>> solely those of the author and do not necessarily
>represent those of
>> Infection Music. Although this e-mail and its
>attachments have been	
>> scanned
>> for the presence of computer viruses, Infection
>Music will not be  
>> liable for
>> any losses as a result of any viruses being
>passed on.
>>
>>
>>