[sdiy] Minimoog board dimensions

[Tom Arnold]

On Tue, Feb 28, 2006 at 05:39:58PM -0800, Michael Bacich wrote:
>    Good job, Bruce.  One comment:  I think you should make sure your
>    trimpot locations are compatible with multi-turn trimpots.  I use
>    20-turn or 15-turn trimmers on Minimoog VCO boards, and the
>    improvement in tuning stability and ease of calibration is DRAMATIC.
>    With 1-turn trimmers, they're a pain in the ass.  The multi-turn
>    trimmers are well worth the cost difference.

Another commend to make is make certain to leave plenty of clearance around
the mounting holes.  This was a major flaw with the boards in DonnieMoogs
and if you arnt carefull with those damn metal clips in a real Moog with
original boards you can easily make your pulse wave quit working in Osc1,
not that I've done that before or anything...

-- 
 -----------------------------------------------------------------
 - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
 - SynthGeek        -
 - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
 - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
 --------------------