[sdiy] Minimoog board dimensions

[Bryce Lanham]

I also need to know the spacings of the card edge connectors from the edge
of the board and measurements of the space between the card edges of the two
boards that have dual card edges.

Heres what my oscillator board looks like (I havent fixed the dimensions
yet):
http://www.hostimage.org/img/3296520.png

On 2/28/06, phil macnutt <philmacnutt at mac.com> wrote:
>
>  Bryce,
>
> I got bored and took the back cover off my mini.
>
>
>
> All numbers are mm.
>
>
>
> Osc board  301 x 137
>
> Filter board  208 x 137
>
>
>
> The two inner boards I did not remove so I don't know what they are
> called, but you probably know:
>
>
>
> Board behind oscillators – 249 x 124
>
> Board behind filter/vca – 170 x 124
>
>
>
> Power supply looking board 100 x 70
>
>
>
> Dimensions do NOT include the card edge insert tabs, which are 6mm long.
>
>
>
> I could scan the backs of the boards on a flatbed if that would help.
>
>
>
> Phil (with nothing to do)
>
>
>  ------------------------------
>
> *From:* owner-synth-diy at dropmix.xs4all.nl [mailto:
> owner-synth-diy at dropmix.xs4all.nl] *On Behalf Of *Bryce Lanham
> *Sent:* Tuesday, February 28, 2006 4:03 PM
> *To:* synth-diy
> *Subject:* Re: [sdiy] Minimoog board dimensions
>
>
>
> I've already messed with scaling, lets just say it didnt work out to well,
> especially with the oscillator board layout which doesn't even show the
> pins.
>
> As soon as I've verified my layouts I'll release them and that will save a
> lot of trouble for clone makers. In addition I'll have sources for the
> various hard-to-find parts needed to make an accurate clone.
>
> On 2/28/06, *Laxt57 at aol.com* < Laxt57 at aol.com> wrote:
>
> Hi
>
>  Follow this link
>
> http://www.fantasyjackpalance.com/fjp/sound/synth/synthdata/16-moog-minimoog.html
>
>
> This site has the schematics and assembly drawings for the minimoog
>
> Scale the drawings till you have .100 between pins and you have it (the
> right scale).
>
>  Anything I can do to help? I am just starting my own mini clone project.
>
> I would love to have one, please email what you would like me to do.
>
> Jeri
>
>
>
>
>
>
>
>
>
> In a message dated 2/28/2006 3:15:53 PM Central Standard Time,
> blanhamsynthdiy at gmail.com writes:
>
> Does anyone have the dimensions for the circuit boards in a Minimoog? I
> have preliminary layouts for all five boards but I need measurements before
> I can finalize and etch them.  As soon as I can get them etched and tested
> I'll put the layouts up for free.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060228/696397b7/attachment.htm>