[sdiy] Dual Bissel question?

[Mike Brown - Livewire Electronics]

Yes, actually... this is a slightly modified dual version of Harry's
'morph-lag' circuit that I put together for Alessandro's synth (which BTW,
is *not* specifically a plan b system)

I liked the prototype so much, that after talking with Harry about it,
decided to release it as a Livewire module.

http://www.electronium.synth.net/livewire/dualbissell.jpg

After reading Harry's disclaimer on the schematic about credit and
commercial use, the modules name became obvious ;)

Mike Brown
Livewire Electronics
mike at livewire-synthesizers.com

> -----Original Message-----
> From: owner-synth-diy at dropmix.xs4all.nl
> [mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of Eric Brombaugh
> Sent: Tuesday, June 27, 2006 3:09 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Dual Bissel question?
>
>
> Aaron Lanterman wrote:
> > To keep this on topic, just what is a dual Bissel generator? (A
> > related simpler question would be what is a Bissel generator?)
> >
> > (In reference to the recent custom EAR Plan B system for Alessandro
> > Cortini)
>
> Earlier post suggested it's one of these:
>
> http://www.wiseguysynth.com/larry/schematics/Morph-Lag.htm
>
> Errr - well maybe two of those...
>
> Eric
>
>