[sdiy] a small case to fit about 7 doepfer-sized modules

[Samppa Tolvanen]

On 1/31/06, beschaving at gmail.com <beschaving at gmail.com> wrote:
> hello everyone,

Hi!

> the following:
>
> 3U = 129 mm high (standard doepfer hight)
>
> 56 HP = 284 mm wide
>
> and approximately 120 mm deep
>

I'd look for Schroff Europak Pro rack, maybe in parts? (The parts are
relatively inexpensive.)

Best match with readily available _parts_:
height 3U,
width 63HP (Just cut it!!)
depth 175mm.

This includes sides so you'll need some sheet metal for the top/bottom
and the back.

Samppa