[sdiy] SMD packages & adapters

[Jaroslav Lukes]

> -----Original Message-----
> From: owner-synth-diy at dropmix.xs4all.nl [mailto:owner-synth-
> Well, I seem to have no choice but to step into the world of SMD devices
> for this digital delay project.  Suitable audio CODEC ICs simply aren't
> available in through the hole packages.
> 
> So I'm hoping someone can give me some pointers as to what SMD packages
> are fairly easily soldered by hand (I've got just an ordinary
> temperature controlled soldering iron with the smallest tip being about
> 1mm across - although I guess I could file down the tip smaller).
> 
> Also, I'd like to build the whole circuit on solderless breadboard
> first, and finally onto 0.1" pitch stripboard, so I will need adapters
> for the SMD devices.  I know this has been mentioned before, but at the
> time I didn't take much noticed (thought I'd be safe from SMD for a
> while!)  Preferably I'm looking for a UK based supplier.

Hi,

Here are contact for adapters in attachment:

Zdenek Novotny - vyvoj HW

ASIX s.r.o.
Staropramenna 4
15000 Praha 5 - Smichov
-----------------------
tel.: +420 257 312 378
fax.: +420 257 329 116
ICQ : 328639127
-----------------------
web cz: http://asix.cz
web en: http://pic-tools.com
e-mail: novotny at asix.cz


Regards, JL.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smddil.gif
Type: image/gif
Size: 12401 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060127/94b2b40e/attachment.gif>