[sdiy] connectors for power distribution

[Ken Stone]

Soft start isn't so good ont things that use power-on reset though!
Personally, I'd rather have a nice clean power-up, even if there are some
down-sides to it. That's why I made the power-on delay circuit board.

Ken

>Of course you can add soft start to any power supply... in fact for
>large systems its a good idea and is often included in professional
>designs.
>
>I had to do this for a synth that drew 400mA from a 800mA supply...
>the start up capacitance was too high. I used two resistors in series
>with the supplies (15 ohms) then shorted them out with relay contacts
>after one second. Click - ready
>
>H^) harry
_______________________________________________________________________
Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>