[sdiy] When building a White Noise module has anyone ......

[Rykhaard D.A.M.I.A.N.]

Further update, after today's building period. :)

I checked the outputs from the 1st and 2nd opamps whilst the machine was
running, with the White Noise out to a VCF and the VCF to a VCA, with each
controlled by their own ADSRs.

With the output level brought down to about 5VAC from the Noise unit,
everything sounded fine.  ??

All of the controls on the machine are operating as they should and there's
no cross noise anywhere in the system.

It looks like the troubles that I was having COULD only have been too high
an amplifcation with René's circuit as the schematic shows.  ??

Anyhoo .... I'm happy with it for the moment. :)

I just got the 7 bit divider up and almost fully running.  It's showing each
of the 7 bit divisions, lighting their LEDs without any troubles in proper
sequence.  (And nice colours too! :D  From Bit 7 to Bit 1 - Purple, Soft
Blue, Green, Yellow, Green, Soft Blue, Purple. :)  I can't wait until my
Maple gets here, to start mounting this entire collection of modules, into
it's panel. :D
Wondering where it is, as I was expecting it, last Thursday or Friday. :( )

Anyways ...... off to starting the final layout design, for the panel. :)
I'll post it in the Design section of my webpage, if it's finished before I
have to leave for work. :)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060110/9c975d62/attachment.htm>