[sdiy] Need help servicing: Korg Mono/Poly ..

[rude66]

every oscillator on the mo/po has a point where you can hear the sound. i
know, because mine has a mod for seperate out of the oscillators.. ;-) so
here you can see if these are ok. but since it all goes through the same
filter and vca, one of these should be your problem spot.

like bob said, play around there and if there's no apparent problem, i'd
resolder this section.. doing this has solved all my problems so far..:-)

r./






On 4/24/06, Jay Vaughan <jv at access-music.de> wrote:
>
> At 11:29 -0700 24/4/06, Bob Weigel wrote:
> >Hmm.  Well everything goes through the same filter.  Start by
> >reseating the chips and interconnects.  If you can wiggle things
> >while listening you'll likely find the problem.  Since it happened
> >while it's sitting around..most likely something like that or else a
> >solder joint that was 'sleeved' by some micro thin corrosion that
> >has grown or something. -Bob
>
>
> actually she has a mysterious history, got no idea what she's been
> through, but i'll definitely ask her if she wakes up .. i'll open her
> up and give it all a wiggle, then.
>
> old synths are fun.
> --
>
> ;
>
> Jay Vaughan
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20060424/3ac5a4d1/attachment.htm>