[sdiy] 1/4W 1% film resistors.

[megaohm]

Hey all,
  I know this is not wholey (wholly?) fitting your description but...I'll be 
receiving a load of resistors in a couple days I'm looking to sell to our 
community for $1/100 or $6/1000. On the minus side, these are not the 
typical standard values. Of course, alot of times resistors need to be 
particular ratios as opposed to the exact value of resistor. Example: If I 
want 7.5volts from 15volts I could use two 15K resistors, one connected to 
15V the other to ground. Or I could use two 10K or two 8.74K ...etc.
 Anyhow, I'll post a messege when I have them up on my site.
 peng
 http://home.comcast.net/~peng5002/index.html
 

 On 9/18/05, The Peasant <ecircuit at telus.net> wrote: 
> 
> >
> > > ... Can anyone recommend
> > > a good source of 1/4 watt 1% metal film resistors at less than 
> $1US/100 in
> > > quantities of 200, for about 30 different values?
> >
> >
> > Would be nice. Nothing? Anybody?
> > Did you get anything off-list, Pez?
> > --
> 
> No, not a word. Maybe we could do a group buy of common values?
> 
> Take care,
> Doug
> ______________________
> The Electronic Peasant
> 
> www.electronicpeasant.com <http://www.electronicpeasant.com>
> 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20050918/7f1055e3/attachment.htm>