[sdiy] need PCB layout for a +/-9V DC supply

[Tom Arnold]

On Thu, Sep 15, 2005 at 10:12:29AM +0100, Seb Francis wrote:
> For power connectors I sometimes use the 4-pin plug/sockets used on CB 
> radio microphones (these have a metal ring which screws in place to stop 
> the plug pulling out).  They are inexpensive, but nice and solid.

After much debating ( see previous posts from me about power connectors ) I
also settled on these.  They are very inexpensive if you buy in Bulk, and if
you are near a radio shack you can pick up ones on short notice if you have
immediate need.

If you can get the Japanese ones vs the ones from Taiwan or China, the
quality is much higher, but any port in a storm.

-- 
 -----------------------------------------------------------------
 - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
 - SynthGeek        -
 - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
 - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
 --------------------