[sdiy] I could use a few pointers on doing a board layout

[Tim Parkhurst]

On 9/7/05, James Patchell <patchell at cox.net> wrote: 
> 
> To see what Harry is talking about...take a look at this file:
> 
> http://www.oldcrows.net/~patchell/synthmodules/vocalfilterpicture.html
> 
> It demonstrates exactly what Harry is talking about...more or less...
> 
> At 10:10 PM 9/7/2005 -0400, harrybissell wrote:
> >OK I'm in...
> >
> >1) YES by all means route power traces and grounds first, along with
> 
> -Jim
> ***************************************************************
> http://www.oldcrows.net/~patchell
> 
> ***************************************************************

 <snip/>

 VERY nice! Thanks for the excellent example pic and the nice, concise 
rules. You two should write a book. I can just see it now: "Harry and Jim's 
Guide to Life and PCB Layout." With the forward stating "The following 
examples and ideas may be freely copied for non-commercial, non-BBB, non-FCP 
use. Any other use punishable by revocation of bathroom privileges." 
 Thanks again, guys. 


Tim (or should that be "Jim and Harry's Guide...") Servo
-- 
"Imagination is more important than knowledge." - Albert Einstein
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20050907/4f48c6c9/attachment.htm>