[sdiy] Cheap Midi->CV

[Pete]

I have a PAIA midi2cv8 and it works fine.

On 9/5/05, megaohm <megaohm1 at gmail.com> wrote:
> 
> I just remembered. someone on the AnalogHeaven list is trying to sell 
> their Syn.com <http://Syn.com> MIDI-CV for $150. The digest has already 
> been deleted from my inbox, so that's all I know.
> 
> On 9/5/05, Jonathan Lutz <jonathan.lutz at gmail.com> wrote: 
> > 
> > I tried to order an EFM one but had a bit of an.. incident.. which 
> > resulted in my money being refunded. So I am looking for alternatives. I was 
> > thinking of the Paia one (which actually costs a little more than I wanted 
> > to spend) but I read on another thread that it has poor resolution and can 
> > be off by 1 or 2 semitones?! Hmm... 
> > 
> > JON 
> > 
> > On 9/5/05, megaohm <megaohm1 at gmail.com> wrote: 
> > > 
> > > How about the EFM one. I have one unbuilt so I can't say for sure how 
> > > good it is, but I've built the EFM MIDI to gate and that works great. I also 
> > > have a Kenton Pro Solo that works good. I bought it for $100 and that's 
> > > about what it's worth. 
> > >  peng
> > >  
> > > 
> > >  On 9/5/05, Jonathan Lutz <jonathan.lutz at gmail.com > wrote: 
> > > > 
> > > > Anyone know of some good cheap midi->CV for use with a homebrew 
> > > > modular? I don't mind if its in format of external box or of PCB/diy 
> > > > module.. but my only requirement for a PCB is that I can order the 
> > > > (unpopulated) PCB and don't have to etch/whatever myself. I would prefer 
> > > > something with velocity sensitivity (is this possible?). 
> > > > 
> > > > Suggestions?
> > > > 
> > > > Thanks!
> > > > JON
> > > > 
> > > 
> > > 
> > 
> 


-- 
listen to my tunes,

http://www.cubanpetemusic.com/12_21_04%20final%20mix.mp3

www.cubanpetemusic.com <http://www.cubanpetemusic.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20050905/51e0cd03/attachment.htm>