[sdiy] Output level on DIY distorion effect ... F1xXx0r3d!

[Jonathan Arkell]

My cute little distortion effect (which I have now dubbed BunnyCruncher)
is working now! Thanks guys!  I replaced the collector resistor, and
with some experimentation found the optimal value.  I added a biasing
resistor and took out the Emitter-Ground resistor.  Finally, I changed
the caps to 10uF.  For fun, I added a LED in the feedback loop.

You guys might be interested in why I choose my component values.  The
answer is soooo simple.  It is what I have laying around.. :P

The updated schematic is here:
http://blog.jonnay.net/uploads/Code/BunnyCrunch.png

I did it in Eagle, so it looks much better.

I also blogged my results if you care:
http://blog.jonnay.net/archives/504-Thanks-to-Sinth-DIY-Crew!.html

Thanks again guys.  WHUTE!

-- 

  ,-------.      The Cute Grim Floating Skull of Hello Cthulu Says
 /  |   |  \
/  _  ^  _  \    Listen To Crazy Shaman Techno
\_/ }|||{ \_/             http://www.jonnay.net
    '^"^`                                              I'm Jonnay!