October 2005 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Oct 1 00:08:36 CEST 2005
Ending: Mon Oct 31 23:59:36 CET 2005
Messages: 1270

• [sdiy] Kraakdoos output revisited   Metrophage
• [sdiy] Kraakdoos output revisited   The Peasant
• [sdiy] Effort?   JH.
• [sdiy] Kraakdoos output revisited   Metrophage
• [sdiy] Effort?   Metrophage
• [sdiy] 2k tempcos on the way   Samppa Tolvanen
• SV: Re: HOORAY! Was: [sdiy] Rene's ms20 filter clone   Karl Ekdahl
• [sdiy] Finishing Coatings - tips?   Michael Ruberto
• [sdiy] Finishing Coatings - tips?   Cynthia Webster
• SV: Re: HOORAY! Was: [sdiy] Rene's ms20 filter clone   harrybissell
• [sdiy] Chip prices today and what about tomorrow?   geoff james
• [sdiy] AVR Synth   Stephen Harrison
• [sdiy] Finishing Coatings - tips?   Tim Parkhurst
• [sdiy] making music with the 3080 on ebay   Heitor Alves
• [sdiy] making music with the 3080 on ebay   megaohm
• [sdiy] Wanted: Thomas Henry Compandor Cookbook   megaohm
• [sdiy] Frontdesigner   Tom Arnold
• [sdiy] Finishing Coatings - tips?   Michael Ruberto
• [sdiy] Finishing Coatings - tips?   Paul Perry
• [sdiy] FS: (Apparently) wonderful VCS3 for sale in Germany (not mine)   JH.
• [sdiy] Effort?   Ian Fritz
• [sdiy] making music with the 3080 on ebay   klosmon
• [sdiy] making music with the 3080 on ebay   Metrophage
• [sdiy] making music with the 3080 on ebay   peter mcquain
• [sdiy] 4066 datasheet question   mikael at mikmo.dk
• [sdiy] Looking for app notes and/or spec sheet for CEM3381   klosmon
• [sdiy] making music with the 3080 on ebay   Tim Parkhurst
• [sdiy] making music with the 3080 on ebay   Fiercefish
• [sdiy] Looking for app notes and/or spec sheet for CEM3381   Adam Schabtach
• [sdiy] Roland TR mods   gregory zifcak
• [sdiy] Roland TR mods   Metrophage
• [sdiy] [WTB] Oakley VCO   Dennis Verschoor
• [sdiy] Photoluminicent oscillator, or optical BBD!   karl dalen
• SV: Re: [sdiy] Chip prices today and what about tomorrow?   karl dalen
• [sdiy] Photoluminicent oscillator, or optical BBD!   Amos
• SV: Re: [sdiy] Chip prices today and what about tomorrow?   Rainer Buchty
• SV: Re: [sdiy] Chip prices today and what about tomorrow?   phillip m gallo
• SV: Re: [sdiy] Photoluminicent oscillator, or optical BBD!   karl dalen
• SV: Re: SV: Re: [sdiy] Chip prices today and what about tomorrow?   karl dalen
• [sdiy] unsubscribe synth-diy   woody
• [sdiy] FS: EMS SYNTHI   Anthony Bisset
• [sdiy] making music with the 3080 on ebay   Scott Stites
• [sdiy] Case dimensions   Keith Winstanley
• [sdiy] Tech prices today.   Senso
• [sdiy] Tech prices today.   Paul Perry
• [sdiy] unsubscribe synth-diy   Bill K
• [sdiy] Update of my site   yves usson
• SV: Re: SV: Re: [sdiy] Chip prices today and what about tomorrow?   Rainer Buchty
• [sdiy] Tech prices today.   harrybissell
• [sdiy] Chip prices today and what about tomorrow?   Tim Daugard
• [sdiy] 3M clear matte sticker for finishing   Brain Dekork
• [sdiy] Chip prices today and what about tomorrow?   jbv
• [sdiy] Roland EP-10   Stephen Harrison
• [sdiy] Chip prices today and what about tomorrow?   Senso
• SV: Re: SV: Re: SV: Re: [sdiy] Chip prices today and what about tomorrow?   karl dalen
• SV: Re: [sdiy] Tech prices today.   karl dalen
• [sdiy] Under paid work forces!   karl dalen
• [sdiy] Pacific Northwest Synth Meeting pix   Paddock, Toby
• [sdiy] Chip prices today and what about tomorrow?   jbv
• [sdiy] nord modular noodle radio   NATE!
• [sdiy] 4066 datasheet question   Harry Bissell Jr
• [sdiy] 4066 datasheet question   john mahoney
• [sdiy] Pacific Northwest Synth Meeting pix   Christopher Randall
• [sdiy] Pacific Northwest Synth Meeting pix   Rafael_Cohen at prusec.com
• [sdiy] 1N914 vs. 1N4148 ?   Magnus Danielson
• [sdiy] 2k tempcos on the way   michael moncur
• [sdiy] 1N914 vs. 1N4148 ?   Harry Bissell Jr
• [sdiy] Pacific Northwest Synth Meeting pix   Christopher Randall
• [sdiy] Pacific Northwest Synth Meeting pix   Christopher Randall
• [sdiy] [OT] spiral water!   Magnus Danielson
• [sdiy] 2 ea. five-octave keyboards FS   Doug Forbes
• [sdiy] SOLD 2 ea. five-octave keyboards   Doug Forbes
• [sdiy] BassAce no MIDI :-(   Sebastian Schünemann
• [sdiy] Massive Novachord restoration   KA4HJH
• [sdiy] Transformer hack, recommendation - or not   Ken Stone
• [sdiy] OT: Screw Linux.   Jeff Farr
• [sdiy] OT: Screw Linux.   Jay
• [sdiy] OT: Screw Linux.   Sumanth Peddamatham
• [sdiy] OT: Screw Linux.   Rob Donker
• [sdiy] OT: Give Linux a Chance (was: Screw Linux.)   R. D. Davis
• [sdiy] OT: Screw Linux.   R. D. Davis
• [sdiy] OT: Screw Linux.   Matt Simpson
• [sdiy] Clever solutions for cabling hinged enclosure?   Julian
• [sdiy] Clever solutions for cabling hinged enclosure?   Eric Honour
• [sdiy] OT: Screw Linux.   R. D. Davis
• [sdiy] OT: Screw Linux.   Jeff Farr
• [sdiy] OT: Screw Linux.   Matt Simpson
• [sdiy] OT: Screw Linux.   Matt Simpson
• [sdiy] OT: Screw Linux.   R. D. Davis
• [sdiy] stocking up on CAPS   peter mcquain
• [sdiy] OT: Screw Linux.   Tom Arnold
• [sdiy] OT: Screw Linux.   Jeff Farr
• [sdiy] OT: Screw Linux.   R. D. Davis
• [sdiy] Pacific Northwest Synth Meeting pix   John L Marshall
• [sdiy] OT: Screw Linux.   Andre Majorel
• [sdiy] Transformer hack, recommendation - or not   Karl Ekdahl
• [sdiy] Transformer hack, recommendation - or not   KA4HJH
• [sdiy] OT: Screw Linux.   Louis van Dompselaar
• [sdiy] CA3039   Tom Arnold
• [sdiy] stocking up on CAPS   Andre Majorel
• [sdiy] equalizer   cheater cheater
• [sdiy] Clever solutions for cabling hinged enclosure?   Henry Till
• [sdiy] unsubscribe synth-diy   Bill K
• [sdiy] This year's DIY meeting in Germany...   Ingo Debus
• [sdiy] OT: Screw Linux.   Metrophage
• [sdiy] OT: Screw Linux.   Metrophage
• [sdiy] OT: Screw Linux.   Rainer Buchty
• [sdiy] Cheap led VU meters?   Toby Paddock
• [sdiy] How about some SDIY?   Ken Stone
• [sdiy] OT: Screw oBScurity   Metrophage
• [sdiy] OT: Screw Linux.   Don't t(h)read on my tentacles, Earthling!
• [sdiy] OT: Screw oBScurity   Les Mizzell
• [sdiy] OT: Screw oBScurity   Richard Wentk
• [sdiy] Clever solutions for cabling hinged enclosure?   The Peasant
• [sdiy] Clever solutions for cabling hinged enclosure?   Simon Brouwer
• [sdiy] Cheap led VU meters?   J. Larry Hendry
• [sdiy] A crazy idea..   Jeff Farr
• [sdiy] OT: Screw oBScurity   Roy J. Tellason
• [sdiy] Tinnitus!   karl dalen
• [sdiy] A crazy idea..   Scott Stites
• [sdiy] A crazy idea..   Michael Zacherl
• [sdiy] A crazy idea..   Scott Stites
• [sdiy] OT: Screw Linux.   Jaco Sloof
• [sdiy] A crazy idea..   Michael Ruberto
• [sdiy] Screw Microsoft!   Michael Ruberto
• [sdiy] A crazy idea..   Richard Wentk
• [sdiy] OT: Screw Linux.   Michael Ruberto
• [sdiy] A crazy idea..   Andre Majorel
• [sdiy] A crazy idea..   Harry Bissell Jr
• [sdiy] A crazy idea..   Harry Bissell Jr
• [sdiy] OT: Screw Linux.   Aaron Bader
• [sdiy] Cheap led VU meters?   Paul Perry
• [sdiy] equalizer   cheater cheater
• [sdiy] SSM2045   Jean-Bernard EMOND
• [sdiy] Cheap led VU meters?   John L Marshall
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] OT: Give Linux a Chance (was: Screw Linux.)   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] This year's DIY meeting in Germany...   Jay Vaughan
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] A crazy idea..   John Loffink
• [sdiy] How about some SDIY?   Aaron Bader
• [sdiy] How about some SDIY?   Aaron Bader
• [sdiy] Project using CEM3394's   David Moylan
• [sdiy] A crazy idea..   Scott Stites
• [sdiy] A crazy idea..   Eric Honour
• [sdiy] Project using CEM3394's   Travis Shire
• [sdiy] A crazy idea..   Jeff Farr
• [sdiy] A crazy idea..   Mike Brown
• [sdiy] Tinnitus!   Tony Kalomiris
• [sdiy] Cleaning amp potentiometers   Gorka Garcia
• [sdiy] OT: Silicon Valley. What's on?   Gorka Garcia
• [sdiy] Cleaning amp potentiometers   ChristianH
• [sdiy] OT: Screw Linux.   Rainer Buchty
• [sdiy] OT: Silicon Valley. What's on?   Antonio Tuzzi
• [sdiy] A crazy idea..   ChristianH
• [sdiy] Cleaning amp potentiometers   Gorka Garcia
• [sdiy] OT: Screw Linux.   Jay Vaughan
• [sdiy] A crazy idea..   Paul Perry
• [sdiy] A crazy idea..   Paul Perry
• [sdiy] Cleaning amp potentiometers   Oakley Sound
• [sdiy] Cleaning amp potentiometers   Gorka Garcia
• [sdiy] equalizer   cheater cheater
• [sdiy] Project using CEM3394's   Dave Kendall
• [sdiy] [FS] MK50240 and more...   Senso
• [sdiy] SSM2045   Senso
• [sdiy] A crazy idea..   Harry Bissell Jr
• [sdiy] FLM201H   geoff james
• [sdiy] OT: Silicon Valley. What's on?   Tim Parkhurst
• [sdiy] [FS] MK50240 and more...   Seb Francis
• [sdiy] Noise and Toys Audio Promo Available   Pat Kammerer
• [sdiy] Noise and Toys Audio Promo Available   Pat Kammerer
• [sdiy] A crazy idea..   Jeff Farr
• [sdiy] A crazy idea..   Jeff Farr
• [sdiy] A crazy idea..   Paul Perry
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   R. D. Davis
• [sdiy] FLM201H   Mike Brown
• [sdiy] A crazy idea..   harrybissell
• [sdiy] Transformer hack, recommendation - or not   harrybissell
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   harrybissell
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   KA4HJH
• [sdiy] tape loops, nagra tape machine erase head hack / AKA dummy load   Anthony Bisset
• [sdiy] A crazy idea..   Fredrik Carlqvist
• [sdiy] tape loops, nagra tape machine erase head hack / AKA dummy load   Ken Stone
• [sdiy] A crazy idea..   Fredrik Carlqvist
• [sdiy] Cleaning Pots Properly   Seb Francis
• [sdiy] tape loops, nagra tape machine erase head hack / AKA dummy load   Anthony Bisset
• [sdiy] A crazy idea..   Paul Perry
• [sdiy] equalizer   ken mosley
• [sdiy] equalizer   ken mosley
• [sdiy] Cleaning Pots Properly   Gorka Garcia
• [sdiy] Cleaning Pots Properly   John L Marshall
• [sdiy] Cleaning Pots Properly   Gorka Garcia
• [sdiy] IBM Joystick Connectors   megaohm
• [sdiy] Cleaning Pots Properly   Tim Daugard
• [sdiy] Cleaning Pots Properly   R. D. Davis
• [sdiy] stupid cap question   Antti Pitkämäki
• [sdiy] Cleaning Pots Properly   xamboldt
• [sdiy] IBM Joystick Connectors   Tom Arnold
• [sdiy] Cleaning Pots Properly   ChristianH
• [sdiy] IBM Joystick Connectors   Roy J. Tellason
• SV: [sdiy] How about some SDIY?   karl dalen
• [sdiy] Cleaning Pots Properly   R. D. Davis
• [sdiy] Cleaning Pots Properly   Peter Grenader
• [sdiy] Cleaning Pots Properly   Harry Bissell Jr
• [sdiy] equalizer   cheater cheater
• [sdiy] stupid cap question   cheater cheater
• [sdiy] A crazy idea..   cheater cheater
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   cheater cheater
• [sdiy] stupid cap question   Simon Brouwer
• [sdiy] A crazy idea..   Tom Arnold
• [sdiy] A crazy idea..   Francois Dion
• SV: [sdiy] How about some SDIY?   Harry Bissell Jr
• [sdiy] Paint restoration - achieving the right finish?   Julian
• [sdiy] Paint restoration - achieving the right finish?   Amos
• SV: [sdiy] How about some SDIY?   Aaron Bader
• [sdiy] Speaking of Paint   Tom Arnold
• [sdiy] And another dumb question ( LM394 related )   Tom Arnold
• [sdiy] And another dumb question ( LM394 related )   harrybissell
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   SealsCrofts 1 9 7 5
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   Roy J. Tellason
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   Eric van Baaren
• [sdiy] And another dumb question ( LM394 related )   simon.oo.o at xs4all.nl
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   adam
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   Antonio Tuzzi
• [sdiy] EL Film from guy on Ebay ( Success! )   Tom Arnold
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   Bob Weigel
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   SealsCrofts 1 9 7 5
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   SealsCrofts 1 9 7 5
• [sdiy] In search of Arp Axxe and Crumar DS-2 Schematics   SealsCrofts 1 9 7 5
• FTG donations (was Re: [sdiy] In search of Arp Axxe and Crumar DS -2 Schematics)   Chris Strellis
• [sdiy] equalizer   Seb Francis
• [sdiy] EL Film from guy on Ebay ( Success! )   Thomas Hudson
• [sdiy] equalizer   Amos
• [sdiy] And another dumb question ( LM394 related )   Tim Daugard
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   Tim Daugard
• [sdiy] equalizer   cheater cheater
• [sdiy] And another dumb question ( LM394 related )   Scott Gravenhorst
• [sdiy] equalizer   Steven Cook
• [sdiy] Bending CD players   Rafael_Cohen at prusec.com
• [sdiy] mc14457/8 data sheets   The Peasant
• [sdiy] Prophet 5 needs a tech in the PNW   Stephen M. Jones
• [sdiy] EL Film from guy on Ebay ( Success! )   Tom Arnold
• [sdiy] sick 909 help   krisp
• [sdiy] equalizer   cheater cheater
• [sdiy] EL Film from guy on Ebay ( Success! )   Roy J. Tellason
• [sdiy] equalizer   Seb Francis
• [sdiy] EL Film from guy on Ebay ( Success! )   Senso
• [sdiy] mc14457/8 data sheets   Senso
• [sdiy] equalizer   Steven Cook
• [sdiy] mc14457/8 data sheets   Synthusiast
• [sdiy] EL Film from guy on Ebay ( Success! )   Amos
• [sdiy] Bending CD players   Dave Krooshof - dendriet.nl
• [sdiy] hystheremin   Dave Krooshof - dendriet.nl
• [sdiy] mc14457/8 data sheets   harrybissell
• [sdiy] EL Film from guy on Ebay ( Success! )   harrybissell
• [sdiy] equalizer   harrybissell
• [sdiy] And another dumb question ( LM394 related )   harrybissell
• [sdiy] EL Film from guy on Ebay ( Success with TG77 too! )   Tom Arnold
• [sdiy] equalizer   cheater cheater
• [sdiy] hystheremin   cheater cheater
• [sdiy] mc14457/8 data sheets   Senso
• [sdiy] My latest 'DIY' project   Paul Schreiber
• [sdiy] Micro check...   Senso
• [sdiy] My latest 'DIY' project   Ben Riggs
• [sdiy] My latest 'DIY' project   Simon Brouwer
• [sdiy] My latest 'DIY' project   Paul Schreiber
• [sdiy] My latest 'DIY' project   Paul Schreiber
• [sdiy] Being accurate   Paul Schreiber
• [sdiy] Being accurate   Richard Wentk
• [sdiy] Being accurate   Amos
• [sdiy] I never thought I'd build another Synthi Clone ...   JH.
• [sdiy] Micro check...   Oakley Sound
• [sdiy] unsubscribe   Bill K
• [sdiy] Being accurate   NATE!
• [sdiy] mc14457/8 data sheets   Tom Arnold
• [sdiy] Being accurate   Paul Perry
• [sdiy] My latest 'DIY' project   Paul Perry
• [sdiy] PolyDAC and MIDI2SDS   Laurie Biddulph
• [sdiy] Being accurate   mcb, inc.
• [sdiy] equalizer   harrybissell
• [sdiy] Being accurate   harrybissell
• [sdiy] FW: is my 1Vdc the same as your 1Vdc? (was: My latest 'DIY' project)   Ben Riggs
• [sdiy] Volt-a-meter   Paul Schreiber
• [sdiy] Being accurate   MBEDTOM at aol.com
• [sdiy] Being accurate   Paul Schreiber
• [sdiy] Digital versus analog   Paul Schreiber
• [sdiy] RE: Volt-a-meter   Ben Riggs
• [sdiy] intel (or equiv)8279   Travis Shire
• [sdiy] MIDI-CV accuracy / Volt-a-meters / etc   Seb Francis
• [sdiy] September Nuts&Volts DCO article   Tom Arnold
• [sdiy] equalizer   cheater cheater
• [sdiy] Bending CD players   Ingo Debus
• [sdiy] Bending CD players   Paul Perry
• [sdiy] MIDI-CV accuracy / Volt-a-meters / etc   John Loffink
• [sdiy] source for plastic enclosures?   Danjel van Tijn
• [sdiy] source for plastic enclosures?   Paul Schreiber
• [sdiy] MIDI-CV accuracy / Volt-a-meters / etc   phillip m gallo
• [sdiy] MIDI-CV accuracy / Volt-a-meters / etc   Paul Schreiber
• [sdiy] MIDI-CV accuracy / Volt-a-meters / etc   Seb Francis
• [sdiy] November Circuit Cellar   Tim Parkhurst
• [sdiy] last call for joystick knob/paddle orders   Bob Weigel
• [sdiy] Yamaha CS-15/20M etc., crumar, or arp slider caps anyone?   Bob Weigel
• [sdiy] November Circuit Cellar   R. D. Davis
• [sdiy] November Circuit Cellar   Roy J. Tellason
• [sdiy] favorite lin/log convertor? (Moog-Korg interface)   Amos
• [sdiy] favorite lin/log convertor? (Moog-Korg interface)   mark verbos
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] MS-20 V/Hz?   Paul Schreiber
• [sdiy] MS-20 V/Hz?   Amos
• [sdiy] MS-20 V/Hz?   Jorn Bilse
• [sdiy] MS-20 V/Hz?   Andre Majorel
• [sdiy] MS-20 V/Hz?   Louis van Dompselaar
• [sdiy] equalizer   cheater cheater
• [sdiy] Paint restoration - achieving the right finish?   cheater cheater
• [sdiy] OTA book on eBay   jbv
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] equalizer   Seb Francis
• [sdiy] equalizer   cheater cheater
• [sdiy] Cleaning Pots Properly (was: Cleaning amp potentiometers)   cheater cheater
• [sdiy] equalizer   Seb Francis
• [sdiy] MS-20 V/Hz?   Jorn Bilse
• [sdiy] OTA book on eBay   Metrophage
• [sdiy] OTA book on eBay   Metrophage
• [sdiy] CMOS deathtrap   Karl Ekdahl
• [sdiy] CMOS deathtrap   Ken Stone
• [sdiy] OTA book on eBay   Colin f
• [sdiy] CMOS deathtrap   Scott Gravenhorst
• [sdiy] Roland JX-10 Aftertouch   Gergo.Palatinszky at nokia.com
• [sdiy] CMOS deathtrap   Magnus Danielson
• [sdiy] equalizer   Tim Parkhurst
• [sdiy] equalizer   Colin f
• [sdiy] MS-20 V/Hz?   mark verbos
• [sdiy] equalizer   Seb Francis
• [sdiy] CMOS deathtrap   Roy J. Tellason
• [sdiy] equalizer, now "Maths"   MBEDTOM at aol.com
• [sdiy] equalizer   Tim Parkhurst
• [sdiy] equalizer, now "Maths"   Tim Parkhurst
• [sdiy] Roland JX-10 Aftertouch   Bob Weigel
• [sdiy] OLED displays for a sequencer   Danjel van Tijn
• [sdiy] Re: OLED displays for a sequencer   Danjel van Tijn
• [sdiy] Re: OLED displays for a sequencer   Tim Parkhurst
• [sdiy] equalizer, now "Maths"   Dave Kendall
• [sdiy] Roland JX-10 Aftertouch   Dave Kendall
• [sdiy] equalizer, now "Maths"   cheater cheater
• [sdiy] equalizer   cheater cheater
• [sdiy] CMOS deathtrap   Mike I.
• [sdiy] Frequency Counter Software   Seb Francis
• [sdiy] Frequency Counter Software   ryan williams
• [sdiy] favorite lin/log convertor? (Moog-Korg interface)   Amos
• [sdiy] Roland JX-10 Aftertouch   Bob Weigel
• [sdiy] CMOS deathtrap   harrybissell
• [sdiy] CMOS deathtrap   harrybissell
• [sdiy] equalizer   harrybissell
• [sdiy] Frequency Counter Software   Seb Francis
• [sdiy] Re: OLED displays for a sequencer   Jeff Farr
• [sdiy] CMOS deathtrap   Amos
• [sdiy] Frequency Counter Software   Amos
• [sdiy] Frequency Counter Software   Grant Richter
• [sdiy] Frequency Counter Software   James Patchell
• [sdiy] Frequency Counter Software   Peter Grenader
• [sdiy] Free to a good home--Emu Proformance "works sort of"   synth at charlielamm.com
• [sdiy] Frequency Counter Software   Ian Fritz
• [sdiy] Frequency Counter Software try G-tune   Modcan Synthesizers
• [sdiy] equalizer   cheater cheater
• [sdiy] G-tune link   Modcan Synthesizers
• SV: Re: [sdiy] CMOS deathtrap   Karl Ekdahl
• [sdiy] Frequency Counter Software   cheater cheater
• [sdiy] equalizer   Johannes Öberg
• [sdiy] Frequency Counter Software   Paul Perry
• [sdiy] Strobe Tuner   Tony Kalomiris
• [sdiy] MS20 mods?   Robert van der Kamp
• [sdiy] MS20 mods?   Andre Majorel
• [sdiy] Roland JX-10 Aftertouch   Chris Strellis
• [sdiy] equalizer   cheater cheater
• [sdiy] equalizer   Johannes Öberg
• [sdiy] OTA book on eBay   groovyshaman
• Fwd: Emu Proformance gone (was: [sdiy] Free to a good home--Emu Proformance)   synth at charlielamm.com
• [sdiy] MS20 mods?   Peter Snow
• [sdiy] Re;MS20 Mods   Jamie Cresswell
• [sdiy] Larry Hendry's last post   Andre Majorel
• [sdiy] Larry Hendry's last post   Peter Grenader
• [sdiy] Larry Hendry   klosmon
• [sdiy] Larry Hendry's last post   Oakley Sound
• [sdiy]RE: [sdiy] Larry Hendry's last post   rdrake
• [sdiy] Larry Hendry's last post   Tim Parkhurst
• [sdiy] RE: [sdiy] Larry Hendry's last post   Scott Stites
• [sdiy] RE: [sdiy] Larry Hendry's last post   Fiercefish
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] equalizer   cheater cheater
• [sdiy] RE: [sdiy] Larry Hendry's last post   cheater cheater
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   cheater cheater
• [sdiy] Larry Hendry's last post   scott at rosetta.com
• [sdiy] OTA book on eBay   Scott Stites
• [sdiy] Strobe Tuner   James Patchell
• [sdiy] Larry Hendry's last post   Bob Weigel
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Andre Majorel
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   cheater cheater
• [sdiy] source for plastic enclosures?   David Panseri
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Dave Kendall
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   cheater cheater
• [sdiy] OTA book on eBay   Scott Stites
• [sdiy] Re: Larry Hendry   john mahoney
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] OTA book on eBay   Paul Perry
• [sdiy] OTA book on eBay   Jay
• [sdiy] Re: Larry Hendry   harrybissell
• [sdiy] OTA book on eBay   Aaron Lanterman
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Dave Kendall
• [sdiy] OTA book on eBay   Scott Stites
• [sdiy] Larry Hendry's last post   The Peasant
• [sdiy] Larry Hendry's last post   Oren Leavitt
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] OTA book on eBay   jbv
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Grant Richter
• [sdiy] Frequency Counter Software   Grant Richter
• [sdiy] Larry Hendry's last post   Richard Wentk
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   cheater cheater
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   ChristianH
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Peter Grenader
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Scott Gravenhorst
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Tim Parkhurst
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Harry Bissell Jr
• [sdiy] CMOS deathtrap   Tim Parkhurst
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Tim Parkhurst
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   cheater cheater
• [sdiy] Oh oh!   The Old Crow
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] Oh oh!   Senso
• [sdiy] can you really *not* hear the difference? (noise)   Anthony Bisset
• [sdiy] Oh oh!   mmanard at columbus.rr.com
• [sdiy] Oh oh!   Jay
• [sdiy] Oh oh!   mmanard at columbus.rr.com
• [sdiy] equalizer   Johannes Öberg
• [sdiy] Operational Amplifiers   Senso
• [sdiy] Oh oh!   Richard Wentk
• [sdiy] Oh oh!   Jay
• [sdiy] can you really *not* hear the difference? (was: Frequency Counter Software)   Scott Gravenhorst
• [sdiy] OTA book on eBay   Fiercefish
• [sdiy] Oh oh!   tsheets at saturn5.com
• [sdiy] Roland S-50   Kyle Stephens
• [sdiy] Oh oh!   phil macnutt
• [sdiy] equalizer   cheater cheater
• [sdiy] DC vs AC in Audio/CV paths for hardwired synth.   Dave Kendall
• [sdiy] can you really *not* hear the difference? (noise)   cheater cheater
• [sdiy] Oh oh!   Jeff Farr
• [sdiy] Roland S-50   cheater cheater
• [sdiy] equalizer   cheater cheater
• [sdiy] Oh oh!   Fiercefish
• [sdiy] equalizer   Richard Wentk
• [sdiy] Ringmod output level problem   mikael at mikmo.dk
• [sdiy] Trinary D/A (R2R?)   Karl Ekdahl
• [sdiy] Roland S-50   Seb Francis
• [sdiy] DC vs AC in Audio/CV paths for hardwired synth.   Harry Bissell Jr
• [sdiy] Trinary D/A (R2R?)   Tom Arnold
• [sdiy] equalizer   cheater cheater
• [sdiy] equalizer   Johannes Öberg
• [sdiy] DC vs AC in Audio/CV paths for hardwired synth.   Dave Kendall
• [sdiy] equalizer   Johannes Öberg
• [sdiy] Oh oh!   Senso
• [sdiy] Oh oh!   Richard Wentk
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] Oh oh!   Senso
• [sdiy] Oh oh!   Tim Parkhurst
• [sdiy] ca3080-based tri-to-sine   Karl Ekdahl
• [sdiy] Oh oh!   Senso
• [sdiy] OTA book on eBay   Senso
• [sdiy] Oh oh!   Senso
• [sdiy] Solder ( 60/40 vs 63/37 )   Tom Arnold
• [sdiy] Solder ( 60/40 vs 63/37 )   Magnus Danielson
• [sdiy] OTA book on eBay   Paul Perry
• [sdiy] OTA book on eBay   Fiercefish
• [sdiy] equalizer   cheater cheater
• [sdiy] ca3080-based tri-to-sine   cheater cheater
• [sdiy] OTA book on eBay   Tim Parkhurst
• [sdiy] OTA book on eBay   Jay
• [sdiy] OTA book on eBay   Fiercefish
• [sdiy] cs30 trigger input   gregory zifcak
• [sdiy] Oh oh!   Roy J. Tellason
• [sdiy] OTA book on eBay   James Patchell
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] OTA book on eBay   Fiercefish
• [sdiy] OTA book on eBay   Aaron Lanterman
• [sdiy] OTA book on eBay   Scott Stites
• [sdiy] A useful distinction   Aaron Lanterman
• [sdiy] For those around Seattle...   Jay
• [sdiy] A useful distinction   Jay
• [sdiy] A useful distinction   Aaron Lanterman
• [sdiy] A useful distinction   Amos
• [sdiy] A useful distinction   Simon Brouwer
• [sdiy] Ringmod output level problem   Fredrik Carlqvist
• SV: Re: [sdiy] ca3080-based tri-to-sine   Karl Ekdahl
• [sdiy] Elektor Vocoder   Carsten Tönsmann
• [sdiy] Roland S-50   Chris Strellis
• [sdiy] Elektor Vocoder   Yves Usson
• [sdiy] A useful distinction   cheater cheater
• [sdiy][OT] A useless distinction   Scott Gravenhorst
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] Roland S-50   cheater cheater
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] OTA book on eBay   Richard Wentk
• [sdiy] OTA book on eBay   Senso
• [sdiy] Solder ( 60/40 vs 63/37 )   Paul Perry
• [sdiy] equalizer   Johannes Öberg
• [sdiy] ca3080-based tri-to-sine   Paul Perry
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] Berlin concert was OTA book on eBay   Oakley Sound
• [sdiy] super-nice LED interface ..   Heitor Alves
• [sdiy] ca3080-based tri-to-sine   Harry Bissell Jr
• [sdiy] Berlin concert was OTA book on eBay   Rainer Buchty
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] OTA book on eBay   Aaron Lanterman
• [sdiy] ca3080-based tri-to-sine   Ian Fritz
• [sdiy] Tri to Sine Shaping - Another Way   Scott Gravenhorst
• [sdiy] IP, copyright etc   Fiercefish
• [sdiy] super-nice LED interface ..   Ian Fritz
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] Ringmod output level problem   mikael at mikmo.dk
• [sdiy] IP, copyright etc   Rainer Buchty
• [sdiy] OTA book on eBay   Harry Bissell Jr
• [sdiy] Ringmod output level problem   Jay Schwichtenberg
• [sdiy] super-nice LED interface ..   Jason Tribbeck
• [sdiy] super-nice LED interface ..   Ian Fritz
• [sdiy] IP, copyright etc   Harry Bissell Jr
• [sdiy] ca3080-based tri-to-sine   Harry Bissell Jr
• [sdiy] super-nice LED interface ..   Paul Perry
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] "spinning" banana plugs   James Coplin
• [sdiy] OTA book on eBay   Tim Daugard
• [sdiy] OTA book on eBay   clark at andrews.edu
• [sdiy] super-nice LED interface ..   Colin f
• [sdiy] IP, copyright etc   Tim Daugard
• [sdiy] Britney Spears - was - OTA book on eBay   Tim Daugard
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] IP, copyright etc   Fiercefish
• [sdiy] IP, copyright etc   Harry Bissell Jr
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Joe Grisso
• [sdiy] IP, copyright etc   Barry Klein
• [sdiy] OTA book on eBay   cheater cheater
• [sdiy] Oh oh!   Peter Grenader
• [sdiy] Roland S-50   Neil Johnson
• [sdiy] Oh oh!   Harry Bissell Jr
• [sdiy] Oh oh!   Jay
• [sdiy] ca3080-based tri-to-sine   Grant Richter
• [sdiy] Making eBooks [was: IP, copyright etc]   Seb Francis
• [sdiy] Tri to Sine Shaping - Another Way   Grant Richter
• SV: Re: [sdiy] ca3080-based tri-to-sine   Karl Ekdahl
• Electronic publishing WAS: [sdiy] IP, copyright etc   Niels A. Moseley
• [sdiy] Making eBooks [was: IP, copyright etc]   Aaron Lanterman
• [sdiy] OTA book on eBay   The Peasant
• Electronic publishing WAS: [sdiy] IP, copyright etc   Seb Francis
• [sdiy] OTA book on eBay/A useful distinction   Dave Kendall
• [sdiy] OTA book on eBay/A useful distinction   Harry Bissell Jr
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Sumanth Peddamatham
• [sdiy] Making eBooks [was: IP, copyright etc]   Tim Daugard
• [sdiy] OTA book on eBay/A useful distinction   Dave Kendall
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Julian
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Colin f
• [sdiy] ca3080-based tri-to-sine   Ian Fritz
• [sdiy] Making eBooks survey   Tim Daugard
• [sdiy] super-nice LED interface ..   Ian Fritz
• [sdiy] IP, copyright etc   Ian Fritz
• [sdiy] IP, copyright etc   Tim Daugard
• [sdiy] super-nice LED interface ..   The Old Crow
• [sdiy] IP, copyright etc   Rainer Buchty
• [sdiy] IP, copyright etc   Rainer Buchty
• [sdiy] OTA book on eBay   Rainer Buchty
• [sdiy] Oh oh!   Rainer Buchty
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] Oh oh!   Senso
• [sdiy] Making eBooks [was: IP, copyright etc]   ryan williams
• SV: Re: [sdiy] Oh oh!   karl dalen
• [sdiy] Making eBooks [was: IP, copyright etc]   Seb Francis
• [sdiy] Floppy drive data [was: OTA book on eBay]   Tom Arnold
• [sdiy] Oh oh!   Harry Bissell Jr
• [sdiy] Oh oh!   Tim Daugard
• SV: Re: [sdiy] OTA book on eBay   karl dalen
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Andre Majorel
• [sdiy] Making eBooks [was: IP, copyright etc]   Fiercefish
• [sdiy] Splendid OTA application paper!   karl dalen
• [sdiy] stripboard magic file of 808 bd wanted - anyone?   Julian
• [sdiy] Anyone got a BA662a they don't need?   Fiercefish
• [sdiy] Books and ISBN numbers .....was:( Making eBooks [was: IP, copyright ).   karl dalen
• [sdiy] mc14457/8 data sheets   Brock Russell
• [sdiy] SSM2044 questions   amokan
• [sdiy] mc14457/8 data sheets   The Peasant
• [sdiy] testing 1, 2, 3   WeAreAs1 at aol.com
• [sdiy] Splendid OTA application paper!   Paul Schreiber
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Jay Vaughan
• SV: Re: [sdiy] ca3080-based tri-to-sine   ryan williams
• [sdiy] super-nice LED interface ..   Paul Perry
• [sdiy] Working on my CD   Michael Ruberto
• [sdiy] Front Designer ( recieved! )   Tom Arnold
• [sdiy] Floppy drive data [was: OTA book on eBay]   Colin Hinz
• [sdiy] Front Designer ( recieved! )   Jorn Bilse
• [sdiy] OTA book on eBay   John L Marshall
• [Fwd: Re: [sdiy] super-nice LED interface ..]   John L Marshall
• [sdiy] Front Designer ( recieved! )   Tom Arnold
• [sdiy] ca3080-based tri-to-sine   Oakley Sound
• [sdiy] Ringmod output level problem   Fredrik Carlqvist
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Magnus Danielson
• [sdiy] Front Designer ( recieved! )   Jeffry Laan
• [sdiy] Anyone got a BA662a they don't need?   Jeffry Laan
• [sdiy] Music From Outerspace/With MOTM Power?   Cole Groff
• [sdiy] super-nice LED interface ..   Jay Vaughan
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Jason Tribbeck
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Paul Perry
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Jason Tribbeck
• [sdiy] super-nice LED interface ..   Colin f
• [sdiy] Source for slide switch   jhaible at debitel.net
• [sdiy] testing 1, 2, 3   ChristianH
• [sdiy] cheaper source for Maplin F11 knob ?   jhaible at debitel.net
• [sdiy] Looking for Memorymoog Guru   ChristianH
• [sdiy] super-nice LED interface ..   David J. Hughes
• [sdiy] Front Designer ( recieved! )   Jorn Bilse
• [sdiy] Front Designer ( recieved! )   Julian
• [sdiy] super-nice LED interface ..   Chris Strellis
• [sdiy] Front Designer ( recieved! )   James Coplin
• [sdiy] Front Designer ( recieved! )   Julian
• [sdiy] OTA book on eBay   Senso
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Andre Majorel
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Ian Fritz
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] I've bought the knobs   JH.
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Harry Bissell Jr
• [sdiy] testing 1, 2, 3   Harry Bissell Jr
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Harry Bissell
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Tim Daugard
• [sdiy] Anyone got a BA662a they don't need?   gregory zifcak
• [sdiy] Anyone got a BA662a they don't need?   Jeffry Laan
• [sdiy] SSM2044 questions   Dave Kendall
• [sdiy] Anyone got a BA662a they don't need?   Fiercefish
• [sdiy] Anyone got a BA662a they don't need?   Altitude
• [sdiy] Anyone got a BA662a they don't need?   Colin f
• [sdiy] super-nice LED interface ..   Harry Bissell Jr
• [sdiy] Making eBooks [was: IP, copyright etc]   Harry Bissell Jr
• [sdiy] Working on my CD   Andre Majorel
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Andre Majorel
• [sdiy] Making eBooks [was: IP, copyright etc]   The Peasant
• [sdiy] super-nice LED interface ..   Jaco Sloof
• [Fwd: Re: [sdiy] super-nice LED interface ..]   Jaco Sloof
• [sdiy] Making eBooks [was: IP, copyright etc]   Rainer Buchty
• [sdiy] Making eBooks [was: IP, copyright etc]   Jay
• [sdiy] Making eBooks [was: IP, copyright etc]   Fiercefish
• [sdiy] cs30 trigger input   Scott Juskiw
• [sdiy] OTA book on eBay   John L Marshall
• [sdiy] Music From Outerspace/With MOTM Power?   Peter Grenader
• [sdiy] Music From Outerspace/With MOTM Power?   Paul Perry
• [sdiy] Linear vs audio taper   R. D. Davis
• [sdiy] cs30 trigger input   gregory zifcak
• [sdiy] testing 1, 2, 3   Peter Grenader
• [sdiy] Making eBooks [was: IP, copyright etc]   harrybissell
• [sdiy] Linear vs audio taper   Travis Shire
• [sdiy] Linear vs audio taper   megaohm
• [sdiy] When NOT to use sockets for chips ?   megaohm
• [sdiy] When NOT to use sockets for chips ?   NATE!
• [sdiy] When NOT to use sockets for chips ?   ASSI
• [sdiy] When NOT to use sockets for chips ?   Seb Francis
• [sdiy] When NOT to use sockets for chips ?   Colin f
• [sdiy] SSM2044 questions   R. Drake
• [sdiy] SSM2044 questions   Colin f
• [sdiy] When NOT to use sockets for chips ?   James Patchell
• [sdiy] VCO PCB finally ordered   Michael Ruberto
• [sdiy] Linear vs audio taper   john mahoney
• [sdiy] When NOT to use sockets for chips ?   Tim Daugard
• [sdiy] Making holes in plastic   Fiercefish
• [sdiy] When NOT to use sockets for chips ?   Scott Gravenhorst
• [sdiy] When NOT to use sockets for chips ?   harrybissell
• [sdiy] When NOT to use sockets for chips ?   Fiercefish
• [sdiy] Making holes in plastic   harrybissell
• [sdiy] Making holes in plastic   Steve Lenham
• [sdiy] Making holes in plastic   Simon Brouwer
• [sdiy] Making holes in plastic   Fiercefish
• [sdiy] Making holes in plastic   Seb Francis
• [sdiy] When NOT to use sockets for chips ?   Tim Daugard
• [sdiy] Making holes in plastic   Tim Daugard
• [sdiy] When NOT to use sockets for chips ?   Scott Gravenhorst
• [sdiy] When NOT to use sockets for chips ?   René Schmitz
• [sdiy] When NOT to use sockets for chips ?   Tim Daugard
• [sdiy] When NOT to use sockets for chips ?   megaohm
• [sdiy] Linear vs audio taper   Senso
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Senso
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Colin f
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Colin f
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] Linear vs audio taper   Andre Majorel
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Colin f
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Fiercefish
• [sdiy] Making holes in plastic   john mahoney
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Fiercefish
• [sdiy] Source for small 3.5mm sockets?   Fiercefish
• [sdiy] CMOS Mux Question   Seb Francis
• [sdiy] Making holes in plastic   harrybissell
• [sdiy] Making holes in plastic   harrybissell
• [sdiy] When NOT to use sockets for chips ?   harrybissell
• [sdiy] CMOS Mux Question   harrybissell
• [sdiy] unsubscribe   Bill K
• [sdiy] Linear vs audio taper   Travis Shire
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Travis Shire
• [sdiy] CS-40M schematics?   Michael -nil-x
• [sdiy] tri-sin shaper and THD   ryan williams
• [sdiy] Re: AX-80 Driver (was: Linear vs audio taper)   Senso
• [sdiy] CMOS Mux Question   Seb Francis
• [sdiy] Making holes   Senso
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Senso
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Rainer Buchty
• [sdiy] CMOS Mux Question   Magnus Danielson
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Colin f
• [sdiy] pd650 - do all the Roland applicaitons use an identical chip?   Senso
• [sdiy] When NOT to use sockets for chips ?   Aaron Lanterman
• [sdiy] CMOS Mux Question   Seb Francis
• [sdiy] new email addr   Toby Paddock
• [sdiy] tri-sin shaper and THD   Ian Fritz
• [sdiy] When NOT to use sockets for chips ?   Rainer Buchty
• [sdiy] Re: AX-80 Driver (was: Linear vs audio taper)   Travis Shire
• [sdiy] CMOS Mux Question   harrybissell
• SV: Re: [sdiy] When NOT to use sockets for chips ?   karl dalen
• [sdiy] CMOS Mux Question   Seb Francis
• [sdiy] tri-sin shaper and THD   harrybissell
• [sdiy] tri-sin shaper and THD   megaohm
• [sdiy] AH Bay Area Gathering pics!   Pete
• [sdiy] tri-sin shaper and THD   ryan williams
• [sdiy] Re: AX-80 Driver (was: Linear vs audio taper)   Travis Shire
• [sdiy] Prototyping breadboard?   Cole Groff
• [sdiy] Jupiter-8 'selected' op-amp replacement   Tony Kalomiris
• [sdiy] WTB: Korg joystick   JH.
• [sdiy] Prototyping breadboard?   Scott Gravenhorst
• [sdiy] Prototyping breadboard?   Paul Perry
• [sdiy] Prototyping breadboard?   Seb Francis
• [sdiy] Prototyping breadboard?   Seb Francis
• [sdiy] Prototyping breadboard?   Tim Daugard
• [sdiy] Jupiter-8 'selected' op-amp replacement   Harry Bissell Jr
• [sdiy] Making eBooks survey - update   Tim Daugard
• [sdiy] Prototyping breadboard?   Jeff Farr
• [sdiy] Juno 106 repair, and maybe mods   Metrophage
• [sdiy] Prototyping breadboard?   James Patchell
• [sdiy] Prototyping breadboard?   Wood
• [sdiy] PC based usb oscilloscopes   Charles Bisaillon
• [sdiy] Prototyping breadboard?   Tim Parkhurst
• [sdiy] Prototyping breadboard?   Wood
• [sdiy] PC based usb oscilloscopes   jbv
• [sdiy] "The" Buchla at Mills College   Tom Arnold
• [sdiy] PC based usb oscilloscopes   jbv
• [sdiy] "The" Buchla at Mills College   Peter Grenader
• [sdiy] Making eBooks survey - update   cheater cheater
• [sdiy] Juno 106 repair, and maybe mods   Bob Weigel
• [sdiy] Juno 106 repair, and maybe mods   Travis Shire
• [sdiy] "The" Buchla at Mills College   Tim Parkhurst
• [sdiy] PAIA VCO, LM13700 diode temp comp.   karl dalen
• [sdiy] Juno 106 repair, and maybe mods   Senso
• [sdiy] Juno 106 repair, and maybe mods   Senso
• [sdiy] Prototyping breadboard?   The Peasant
• [sdiy] PAIA VCO, LM13700 diode temp comp.   James Patchell
• [sdiy] Making eBooks survey - update   Travis Shire
• [sdiy] "The" Buchla at Mills College   mark verbos
• [sdiy] Modular tube synth, Canadas pride!   karl dalen
• [sdiy] Modular tube synth, Canadas pride!   Tom Arnold
• [sdiy] rack chassis   Wood
• [sdiy] Protel Component Design?   Tim Curtis
• [sdiy] Modular tube synth, Canadas pride!   Paul Perry
• [sdiy] Panasonic 50k Pots ( Blacet type )   Tom Arnold
• [sdiy] Jupiter-8 'selected' op-amp replacement   Tony Kalomiris
• [sdiy] rack chassis   BrightBoy
• [sdiy] PAIA VCO, LM13700 diode temp comp.   Ian Fritz
• [sdiy] PC based usb oscilloscopes   Bert Schiettecatte
• [sdiy] Modular tube synth, Canadas pride!   Peter Snow
• [sdiy] Modular tube synth, Canadas pride!   Grant Richter
• [sdiy] Modular tube synth, Canadas pride!   Colin f
• [sdiy] "The" Buchla at Mills College   Metzger, Michael A
• [sdiy] "The" Buchla at Mills College   Jay
• [sdiy] "The" Buchla at Mills College   john mahoney
• [sdiy] Dumb idea of the morning   Tom Arnold
• [sdiy] Modular tube synth, Canadas pride!   Travis Shire
• [sdiy] Modular tube synth, Canadas pride!   Harry Bissell Jr
• [sdiy] Modular tube synth, Canadas pride!   Colin f
• [sdiy] unsubscribe   Bill K
• [sdiy] unsubscribe   Rafael_Cohen at prusec.com
• [sdiy] Another cat pee mystery solved, Juno 106   Metrophage
• [sdiy] motm-000 or similar?   Cole Groff
• [sdiy] Another cat pee mystery solved, Juno 106   Senso
• [sdiy] "The" Buchla at Mills College   Grant Richter
• [sdiy] Pro One Tuning/Scaling Issue   Michael -nil-x
• [sdiy] Another cat pee mystery solved, Juno 106   Bob Weigel
• [sdiy] Modular tube synth, Canadas pride!   Carbon111
• [sdiy] motm-000 or similar?   Scott Juskiw
• SV: Re: [sdiy] Modular tube synth, Canadas pride!   karl dalen
• SV: Re: [sdiy] PAIA VCO, LM13700 diode temp comp.   karl dalen
• SV: Re: [sdiy] PAIA VCO, LM13700 diode temp comp.   Ian Fritz
• [sdiy] Hugh Le Caines and is 12 tone birds!!   karl dalen
• [sdiy] tri-sin shaper and THD   Ian Fritz
• [sdiy] Another cat pee mystery solved, Juno 106   Eric Honour
• [sdiy] Another cat pee mystery solved, OT   harrybissell
• [sdiy] Another cat pee mystery solved, OT   WeAreAs1 at aol.com
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Casio Rapman
• [sdiy] Weller EC3000 parts anyone?   Bob Weigel
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Aaron Lanterman
• [sdiy] PAIA VCO, LM13700 diode temp comp.   phillip m gallo
• [sdiy] Looking for connector for normalled wiring   Robert van der Kamp
• SV: Re: [sdiy] PAIA VCO, LM13700 diode temp comp.   Simon Brouwer
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Rainer Buchty
• [sdiy] Dead synth - what to do with it   Tim Child
• [sdiy] tri-sin shaper and THD   jhaible at debitel.net
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Casio Rapman
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Franck Pissotte
• [sdiy] Dead synth - what to do with it   Rafael_Cohen at prusec.com
• [sdiy] Dead synth - what to do with it   Rainer Buchty
• [sdiy] Need: Parts & Schematics / Datasheets ~``~   Travis Shire
• [sdiy] Free Electronics CAD/Simulation program?   Josh Henne
• [sdiy] "The" Buchla at Mills College   Metzger, Michael A
• [sdiy] 7 Segment Display Driver?   xamboldt
• [sdiy] 7 Segment Display Driver?   The Old Crow
• [sdiy] Electronotes   Fiercefish
• [sdiy] phone cord, hook up wire?   Cole Groff
• [sdiy] phone cord, hook up wire?   Gogegous
• [sdiy] phone cord, hook up wire?   James Patchell
• [sdiy] Electronotes   Harry Bissell Jr
• [sdiy] Trigger pulse length   Fiercefish
• [sdiy] Free Electronics CAD/Simulation program?   Harry Bissell Jr
• [sdiy] Free Electronics CAD/Simulation program?   Harry Bissell Jr
• [sdiy] Trigger pulse length   Scott Gravenhorst
• [AH] Re: [sdiy] Electronotes   Samppa Tolvanen
• [sdiy] 7 Segment Display Driver?   xamboldt
• [sdiy] phone cord, hook up wire?   Gogegous
• [sdiy] phone cord, hook up wire?   Tim Daugard
• [sdiy] Trigger pulse length   Harry Bissell Jr
• [sdiy] 7 Segment Display Driver?   Harry Bissell Jr
• [AH] Re: [sdiy] Electronotes   Sean Costello
• [sdiy] Free Electronics CAD/Simulation program?   ryan williams
• [sdiy] PAIA VCO, LM13700 diode temp comp.   Ian Fritz
• [sdiy] Trigger pulse length   Seb Francis
• [sdiy] tri-sin shaper and THD   ryan williams
• [AH] Re: [sdiy] Electronotes   Ian Fritz
• [sdiy] 7 Segment Display Driver?   Ken Stone
• [sdiy] phone cord, hook up wire?   Paul Perry
• [sdiy] poor man's alternative to a CS-80?   Danjel van Tijn
• [sdiy] poor man's alternative to a CS-80?   Jay
• [sdiy] poor man's alternative to a CS-80?   Antti Huovilainen
• [sdiy] McClear Studio Auction (1067 items)   Charles Bisaillon
• SV: RE: [sdiy] PAIA VCO, LM13700 diode temp comp.   karl dalen
• SV: [sdiy] Dead synth - what to do with it   karl dalen
• [sdiy] tri-sin shaper and THD   Ian Fritz
• [sdiy] tri-sin shaper and THD   harrybissell
• SV: RE: [sdiy] PAIA VCO, LM13700 diode temp comp.   harrybissell
• [sdiy] McClear Studio Auction (1067 items)   Doug Terrebonne
• [sdiy] poor man's alternative to a CS-80?   Aaron Lanterman
• [sdiy] Dead Ensoniq EPS - any spoils?   Aaron Lanterman
• SV: RE: [sdiy] PAIA VCO, LM13700 diode temp comp.   Ian Fritz
• [sdiy] tri-sin shaper and THD   Ian Fritz
• [sdiy] McClear Studio Auction (1067 items)   Travis Shire
• [sdiy] McClear Studio Auction (1067 items)   mcb, inc.
• [sdiy] poor man's alternative to a CS-80?   Jorn Bilse
• Sv: Re: [sdiy] 7 Segment Display Driver?   Daniel Araya
• [sdiy] phone cord, hook up wire?   DTK
• [sdiy] Dead Ensoniq EPS - any spoils?   Rainer Buchty
• [sdiy] poor man's alternative to a CS-80?   ChristianH
• [sdiy] phone cord, hook up wire?   Paul Perry
• [sdiy] poor man's alternative to a CS-80?   Antti Huovilainen
• [sdiy] any DIY poly synth projects out there? WAS poor man's CS80   Danjel van Tijn
• [sdiy] any DIY poly synth projects out there? WAS poor man's CS80   yves usson
• [sdiy] any DIY poly synth projects out there? WAS poor man's CS80   yves usson
• [sdiy] unsubscribe   Bill K
• [sdiy] Dead synth - what to do with it   Tim Child
• [sdiy] unsubscribe? too late mate!   Senso
• [sdiy] Dead synth - what to do with it   Rainer Buchty
• [sdiy] modularizing an Ibanez ue400   Antonio Tuzzi
• [sdiy] Dead synth - what to do with it   Senso
• [sdiy] poor man's alternative to a CS-80?   JH.
• [sdiy] Ring modulator and power supply questions   Rutger Vlek
• [sdiy] poor man's alternative to a CS-80?   Antti Huovilainen
• [sdiy] For sale: The art of electronics   Karl Ekdahl
• [sdiy] Ring modulator and power supply questions   john mahoney
• [sdiy] Ring modulator and power supply questions   Harry Bissell Jr
• [sdiy] poor man's alternative to a CS-80?   JH.
• [sdiy] 7 Segment Display Driver?   fmg
• [sdiy] poor man's alternative to a CS-80?   The Old Crow
• [sdiy] Using .Com power supply for MOTM?   Cole Groff
• [sdiy] Using .Com power supply for MOTM?   Jay
• [sdiy] 7 Segment Display Driver?   John Speth
• [sdiy] Ring modulator and power supply questions   john mahoney
• [sdiy] x0xb0x cv ?   Joseph Palermo
• [sdiy] x0xb0x cv ?   Amos
• [sdiy] any DIY poly synth projects out there? WAS poor man's CS80   Dave Kendall
• [sdiy] Using .Com power supply for MOTM?   larry at unicode.com
• [sdiy] 7 Segment Display Driver?   MBEDTOM at aol.com
• [sdiy] Dumb idea of the morning   larry at unicode.com
• [sdiy] 7 Segment Display Driver?   Ken Stone
• [sdiy] 7 Segment Display Driver?   xamboldt
• [sdiy] poor man's alternative to a CS-80?   Sean Costello
• [sdiy] 7 Segment Display Driver?   The Old Crow
• [sdiy] x0xb0x cv ?   limor
• [sdiy] poor man's alternative to a CS-80?   Sean Costello
• [sdiy] poor man's alternative to a CS-80?   Sean Costello
• [sdiy] Rane Schematics   Tim Parkhurst
• [sdiy] unsubscribe   Gareth B.
• [sdiy] HP pulse generator   Brett Maddaford
• [sdiy] x0xb0x cv ?   Amos
• [sdiy] poor man's alternative to a CS-80?   BrightBoy
• [sdiy] Rane Schematics   Josh Henne
• [sdiy] Rane Schematics   Josh Henne
• [sdiy] has anyone ever made their own Nord Modular?   Danjel van Tijn
• [sdiy] has anyone ever made their own Nord Modular?   NATE!
• [sdiy] has anyone ever made their own Nord Modular?   jbv
• [sdiy] has anyone ever made their own Nord Modular?   Peter Grenader
• [sdiy] has anyone ever made their own Nord Modular?   Danjel van Tijn
• [sdiy] An Interview with Carmine Bonanno of the Octave Cat!!   SealsCrofts 1 9 7 5
• [sdiy] has anyone ever made their own Nord Modular?   amokan
• [sdiy] has anyone ever made their own Nord Modular?   Franck Pissotte
• [sdiy] has anyone ever made their own Nord Modular?   Jay Vaughan
• [sdiy] has anyone ever made their own Nord Modular?   Jay Vaughan
• [sdiy] has anyone ever made their own Nord Modular?   Danjel van Tijn
• [sdiy] has anyone ever made their own Nord Modular?   NATE!
• [sdiy] An Interview with Carmine Bonanno of the Octave Cat!!   Bob Weigel
• [sdiy] Psycho LFO? Wiring...   Cole Groff
• [sdiy] Poly 61 near death?   Ken Stone
• [sdiy] Psycho LFO? Wiring...   NATE!
• [sdiy] has anyone ever made their own Nord Modular?   Andre Majorel
• [sdiy] has anyone ever made their own Nord Modular?   jays at aracnet.com
• [sdiy] has anyone ever made their own Nord Modular?   James Patchell
• [sdiy] MIDI Optocoupler   Tim Parkhurst
• [sdiy] Psycho LFO? Wiring...   Christopher Randall
• [sdiy] boring question about wire   john mahoney
• [sdiy] MIDI Optocoupler   Bob Weigel
• [sdiy] boring question about wire   Tom Arnold
• [sdiy] MIDI Optocoupler   harrybissell
• [sdiy] EMS synthi AKS emulation   Charles Bisaillon
• [sdiy] Poly 61 near death?   Joseph Palermo
• [sdiy] Poly 61 near death?   Ken Stone
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Johannes Öberg
• [sdiy] wondering how to a pcb behind a pannel neatly?   Julian
• [sdiy] Poly 61 near death?   Bob Weigel
• [sdiy] wondering how to a pcb behind a pannel neatly?   Bob Devries
• [sdiy] wondering how to a pcb behind a pannel neatly?   Tom Arnold
• [sdiy] Locking paint   Tony Kalomiris
• [sdiy] EMS synthi AKS emulation   Tony Kalomiris
• [sdiy] wondering how to a pcb behind a pannel neatly?   Bob Weigel
• [sdiy] Poly 61 near death?   Bob Weigel
• [sdiy] Poly 61 near death?   Travis Shire
• [sdiy] Locking paint   Travis Shire
• [sdiy] wondering how to a pcb behind a pannel neatly?   Travis Shire
• [sdiy] wondering how to a pcb behind a pannel neatly?   JH.
• [sdiy] Poly 61 near death?   Richard Arntzen
• [sdiy] Locking paint   Paul Perry
• [sdiy] wondering how to a pcb behind a pannel neatly?   R. Drake
• [sdiy] wondering how to a pcb behind a pannel neatly?   creekree at gmx.de
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Scott Gravenhorst
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Richard Wentk
• [sdiy] wondering how to a pcb behind a pannel neatly?   Adam Schabtach
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] FET for VCO cap discharge   Magnus Danielson
• [sdiy] wondering how to a pcb behind a pannel neatly?   Seb Francis
• [sdiy] modularizing an Ibanez ue400   HOSHUYAMA
• [sdiy] Poly 61 near death?   Mike I.
• [sdiy] MIDI Optocoupler   Senso
• [sdiy] modularizing an Ibanez ue400   rude66
• [sdiy] wondering how to a pcb behind a pannel neatly?   Senso
• [sdiy] modularizing an Ibanez ue400   JH.
• [sdiy] modularizing an Ibanez ue400   JH.
• [sdiy] Locking paint   James Patchell
• [sdiy] MIDI Optocoupler   James Patchell
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Rainer Buchty
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Richard Wentk
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Sean Costello
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Rainer Buchty
• [sdiy] Modular sampler/sample playback   Fiercefish
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Johannes Öberg
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Johannes Öberg
• [sdiy] boring question about wire   Roy J. Tellason
• [sdiy] Modular sampler/sample playback   amokan
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Rainer Buchty
• [sdiy] boring question about wire   Tom Arnold
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Rainer Buchty
• [sdiy] boring question about wire   Roy J. Tellason
• [sdiy] SAJ210   Karl Ekdahl
• [sdiy] boring question about wire   Tom Arnold
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Richard Wentk
• [sdiy] SAJ210   Bob Weigel
• [sdiy] FET for VCO cap discharge   Mike I.
• [sdiy] wondering how to a pcb behind a pannel neatly?   Paul Perry
• [sdiy] Locking paint   harrybissell
• [sdiy] Locking paint   harrybissell
• [sdiy] Poly 61 near death?   harrybissell
• [sdiy] Poly 61 near death?   Ken Stone
• [sdiy] Modular sampler/sample playback   Anthony Bisset
• [sdiy] An Interview with Carmine Bonanno of the Octave Cat!!   KHeck73 at aol.com
• [sdiy] wondering how to a pcb behind a pannel neatly?   harrybissell
• [sdiy] 68000 docs   Bob Devries
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] PolyDAC.   Cole Groff
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] An Interview with Carmine Bonanno of the Octave Cat!!   Ian Fritz
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] gotta run   JH.
• [sdiy] gotta run   Magnus Danielson
• [sdiy] PolyDAC.   Oakley Sound
• [sdiy] FET for VCO cap discharge   Don Tillman
• [sdiy] FET for VCO cap discharge   Magnus Danielson
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Johannes Öberg
• [sdiy] FET for VCO cap discharge   Mike I.
• [sdiy] FET for VCO cap discharge   Mike I.
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Rainer Buchty
• [sdiy] Baked on Enamel Finishes?   Tim Curtis
• [sdiy] gotta run   JH.
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] Real cause of DIY death   Brice D. Hornback
• [sdiy] FET for VCO cap discharge   JH.
• [sdiy] unsubscribe   Nick Upton
• [sdiy] Re: Poly-61 info   Bob Weigel
• [sdiy] FET for VCO cap discharge   harrybissell
• [sdiy] Baked on Enamel Finishes?   The Peasant
• [sdiy] Baked on Enamel Finishes?   Paul Higgins
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] FET for VCO cap discharge   Ian Fritz
• [sdiy] Juno-6 lever switch source?   Tom Arnold
• [sdiy] Juno-6 lever switch source?   Travis Shire
• [sdiy] 7-seg LED driving frequency   Ken Stone
• [sdiy] Another try; SAJ110 this time   Karl Ekdahl
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Grant Richter
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Tim Parkhurst
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Samppa Tolvanen
• [sdiy] Semi-OT: Manual for Kawai Q-80   Karl Ekdahl
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Aaron Lanterman
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Richard Wentk
• [sdiy] FET for VCO cap discharge   ASSI
• [sdiy] Cynthia Bruyns - Vibration Lab Software   Tim Parkhurst
• [sdiy] 7-seg LED driving frequency   Seb Francis
• SV: Re: [sdiy] Another try; SAJ110 this time   Karl Ekdahl
• [sdiy] DSP kits (was: Re: has anyone ever made their own Nord Modular?)   Johannes Öberg
• [sdiy] FET for VCO cap discharge   Magnus Danielson
• [sdiy] 7-seg LED driving frequency   Simon Brouwer
• [sdiy] Semi-OT: Manual for Kawai Q-80   WeAreAs1 at aol.com
• [sdiy] Vactrols & Lopass Gates   Michael Ruberto
• [sdiy] UK Source for 2N4302   Michael Ruberto
• [sdiy] 7-seg LED driving frequency   Seb Francis
• [sdiy] sick 909 help   rude66
• [sdiy] 7-seg LED driving frequency   ChristianH
• [sdiy] Oberheim dsx sequencer and Digisound Modular   dave
• [sdiy] distort me!   creekree at gmx.de
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] distort me!   Harry Bissell Jr
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] distort me!   Amos
• [sdiy] distort me!   Seb Francis
• [sdiy] distort me!   Seb Francis
• [sdiy] 7-seg LED driving frequency   Seb Francis
• [sdiy] 7-seg LED driving frequency   Roy J. Tellason
• [sdiy] Vactrols & Lopass Gates   Scott Stites
• [sdiy] distort me!   gregory zifcak
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] 68000 docs   Kevin Moon
• [sdiy] Vactrols & Lopass Gates   David Moylan
• [sdiy] 68000 docs   Scott Gravenhorst
• [sdiy] Vactrols & Lopass Gates   Scott Stites
• [sdiy] 68000 docs   Magnus Danielson
• [sdiy] 68000 docs   Charles Bisaillon
• [sdiy] Ring modulator and power supply questions -> PSU now   Rutger Vlek
• [sdiy] Ring modulator and power supply questions -> PSU now   Harry Bissell Jr
• [sdiy] Ring modulator and power supply questions -> PSU now   Paul Perry
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] Vactrols & Lopass Gates   Jay
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] Vactrols & Lopass Gates   Peter Grenader
• [sdiy] 68000 docs   Kevin Moon
• [sdiy] 68000 docs   James Patchell
• [sdiy] AR envelope and 4066   ryan williams
• [sdiy] AR envelope and 4066   gabriel at lindeborg.org
• [sdiy] AR envelope and 4066   Simon Brouwer
• [sdiy] CMOS counter abnormalities   Karl Ekdahl
• [sdiy] Vactrols & Lopass Gates   mark verbos
• [sdiy] CMOS counter abnormalities   René Schmitz
• [sdiy] Need java midi programs   Fredrik Carlqvist
• [sdiy] 2n5172 Question   Rafael_Cohen at prusec.com
• [sdiy] Need java midi programs   David Panseri
• [sdiy] Need java midi programs   Charles Bisaillon
• [sdiy] MFB-502 Drum machine mods/Schematics?   Altitude
• [sdiy] 2n5172 Question   mark verbos
• [sdiy] Drunk human and voice machines (was 68000 docs,)   karl dalen
• [sdiy] Need java midi programs   ASSI
• [sdiy] FIlter FM=narrow band 2 quadrant spectrum modulation?   karl dalen
• [sdiy] FIlter FM=narrow band 2 quadrant spectrum modulation?   Sean Costello
• SV: Re: [sdiy] FIlter FM=narrow band 2 quadrant spectrum modulation?   karl dalen
• [sdiy] Quadrature by Waveshaping   JH.
• [sdiy] Matrix FX preliminary panel   JH.
• [sdiy] Matrix FX preliminary panel   harrybissell
• [sdiy] CMOS counter abnormalities   harrybissell
• [sdiy] FA: SN76477   The Peasant
• [sdiy] FA: sn76477   The Peasant
• [sdiy] Crap.. I need help with my x0x   Jeff Farr
• [AH] Re: [sdiy] Matrix FX preliminary panel   Jeff Farr
• [sdiy] Another smt prototyping product   mcb, inc.
• [sdiy] Crap.. I need help with my x0x   gregory zifcak
• [sdiy] AR envelope and 4066 (now complete)   ryan williams
• [sdiy] swing clock generator   Mike Burnham
• [sdiy] Crap.. I need help with my x0x   Jeff Farr
• [sdiy] Crap.. I need help with my x0x   Jeff Farr
• [sdiy] octave dividers compatibility   Antonio Tuzzi
• [sdiy] shuffle CMOS   Mike Burnham
• [sdiy] shuffle CMOS   mark verbos
• SV: [sdiy] Matrix FX preliminary panel   karl dalen
• SV: [sdiy] Matrix FX preliminary panel   jhaible at debitel.net
• [sdiy] AR envelope and 4066 (now complete)   Ken Stone
• [sdiy] shuffle cmos   Mike Burnham
• [sdiy] Crap.. I need help with my x0x   Seb Francis
• Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Seb Francis
• [sdiy] Matrix FX preliminary panel   JH.
• [sdiy] Hot Rod SynthDIY   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Roy J. Tellason
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Michael Ruberto
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Paul Perry
• [sdiy] Colored knobs   karl dalen
• [sdiy] FA: sn76477   Heitor Alves
• [sdiy] FA: sn76477   Tom Arnold
• [sdiy] Colored knobs   Senso
• [sdiy] FA: sn76477   ken mosley
• [sdiy] My special topics class approved! Whoo hoo!   Aaron Lanterman
• [sdiy] FA: sn76477   The Peasant
• [sdiy] MN6221AA Melody Generator   Tom Arnold
• [sdiy] FA: sn76477   Travis Shire
• [sdiy] My special topics class approved! Whoo hoo!   Charles Bisaillon
• [sdiy] My special topics class approved! Whoo hoo!   Charles Bisaillon
• [sdiy] My special topics class approved! Whoo hoo!   mcb, inc.
• [sdiy] TOM at EFM   Mike Burnham
• [sdiy] TOM at EFM   NATE!
• [sdiy] My special topics class approved! Whoo hoo!   Rainer Buchty
• [sdiy] TOM at EFM   Leslie Schwartz
• [sdiy] My special topics class approved! Whoo hoo!   Bart Provoost
• [sdiy] TOM at EFM   Paul Perry
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Fredrik Carlqvist
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Michael Ruberto
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Rainer Buchty
• [sdiy] Hot Rod SynthDIY   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Scott Gravenhorst
• [sdiy] OT: WANTED - MIDI Controller   Michael Ruberto
• [sdiy] Hot Rod SynthDIY   Michael Ruberto
• [sdiy] OT: WANTED - MIDI Controller   Altitude
• [sdiy] Hot Rod SynthDIY   Scott Gravenhorst
• Rate CV was: RE: Joysticks [was: SV: [sdiy] Matrix FX preliminary panel]   Harry Bissell Jr
• [sdiy] More on adding analog ins to digital   xamboldt
• [sdiy] More on adding analog ins to digital   Seb Francis
• [sdiy] More on adding analog ins to digital   xamboldt
• [sdiy] More on adding analog ins to digital   xamboldt
• [sdiy] Hot Rod SynthDIY   Senso
• [sdiy] Bad parts!   Michael Ruberto
• [sdiy] More on adding analog ins to digital   xamboldt
• [sdiy] Some help with a current mirror, please   Jeff Farr
• [sdiy] 1N34 diode question   Sebastian Schünemann
• [sdiy] Some help with a current mirror, please   Simon Brouwer
• [sdiy] Some help with a current mirror, please   Simon Brouwer
• [sdiy] 1N34 diode question   Harry Bissell Jr
• [sdiy] Bad parts!   Paul Higgins
• [sdiy] Bad parts!   Bob Weigel
• [sdiy] Hi All   Ray Wilson
• [sdiy] 1N34 diode question   Tom Arnold
• [sdiy] Hot Rod SynthDIY   Harry Bissell Jr
• [sdiy] Hot Rod SynthDIY   Rainer Buchty
• [sdiy] Blacet DSC 2000 Rev 0 manual   Tom Arnold
• [sdiy] Hot Rod SynthDIY   Senso
• [sdiy] Can you tell what it is yet?   Keith Winstanley
• [sdiy] Can you tell what it is yet?   Gene Stopp
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] Hi All   Ray Wilson
• [sdiy] AVRstudio4.xx   Batz Goodfortune
• [sdiy] Hot Rod SynthDIY   KA4HJH
• [sdiy] Hot Rod SynthDIY   NATE!
• [sdiy] In the Dark   Amos
• [sdiy] Bad parts!   Paul Perry
• [sdiy] Hot Rod SynthDIY   KA4HJH
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] [OT] plate reverb impulse responses?   JH.
• [sdiy] Hi All   Ray Wilson
• [sdiy] AVRstudio4.xx   Seb Francis
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] Bad parts!   Michael Ruberto
• [sdiy] [OT] plate reverb impulse responses?   Jay
• [sdiy] 1N34 diode question   Sebastian Schünemann
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] 1N34 diode question   HA.Synth at t-online.de
• [sdiy] In the Dark   Amos
• [sdiy] Can you tell what it is yet?   Amos
• [sdiy] [OT] plate reverb impulse responses?   JH.
• [sdiy] [OT] plate reverb impulse responses?   Amos
• [sdiy] Question regarding sends...   Christopher Randall
• [sdiy] 1N34 diode question   JH.
• [sdiy] Hot Rod SynthDIY (DOH!)   Michael Ruberto
• [sdiy] [OT] plate reverb impulse responses?   Seb Francis
• [sdiy] 1N34 diode question   Oren Leavitt
• [sdiy] [OT] 7 Synths From The 70'S   TJ
• [sdiy] 1.87K tempco   klosmon
• [sdiy] In the Dark   KA4HJH
• [sdiy] X0xb0x almost working   Joseph Palermo
• [sdiy] Hi All   harrybissell
• [sdiy] X0xb0x almost working   Jeff Farr
• [sdiy] Hi All   James Patchell
• [sdiy] Can you tell what it is yet?   Jeff Farr
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] 1N34 diode question   HA.Synth at t-online.de
• Concentric Pots - was Re: [sdiy] Bad parts!   Michael Ruberto
• [sdiy] In the Dark   Amos
• Concentric Pots - was Re: [sdiy] Bad parts!   Oakley Sound
• [sdiy] 1.87K tempco   D A F
• [sdiy] 1.87K tempco   klosmon
• [sdiy] In the Dark   NATE!
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] 1.87K tempco   Tim Parkhurst
• [sdiy] Guitar amp design job   Tim Parkhurst
• [sdiy] 1.87K tempco   Senso
• [sdiy] Newbie   senna guillermo
• [sdiy] Newbie   Aaron Lanterman
• [sdiy] 1.87K tempco   harrybissell
• [sdiy] 1.87K tempco   groovyshaman
• [sdiy] In the Dark   Amos
• [sdiy] [dsiy] patch cables.   Cole Groff
• [sdiy] screen burning service   NATE!
• [sdiy] In the Dark   Genie Murasaki
• [sdiy] UK supplier of alps switches for 606/303?   Julian
• SV: [sdiy] UK supplier of alps switches for 606/303?   karl dalen
• [sdiy] recommendations for bench supply?   Dino Leone
• [sdiy] 1.87K tempco   mikael at mikmo.dk
• [sdiy] recommendations for bench supply?   Dino Leone
• [sdiy] recommendations for bench supply?   Seb Francis
• [sdiy] recommendations for bench supply?   Dino Leone
• [sdiy] recommendations for bench supply?   Tom Arnold
• [sdiy] recommendations for bench supply?   Harry Bissell Jr
• [sdiy] September Nuts&Volts DCO article   Gabriel Lindeborg
• [sdiy] X0xb0x almost working   tsheets at saturn5.com
• [sdiy] X0xb0x almost working   Grant Richter
• [sdiy] recommendations for bench supply?   Grant Richter
• [sdiy] [dsiy] patch cables.   Travis Shire
• [sdiy] screen burning service   Jeff Barganier
• [sdiy] variable midi shuffle?   gregory zifcak
• [sdiy] screen burning service   NATE!
• [sdiy] Semi-OT: PIC trouble   Karl Ekdahl
• [sdiy] Question for Yamaha tech?   Senso
• [sdiy] recommendations for bench supply?   Michael Ruberto
• Concentric Pots - was Re: [sdiy] Bad parts!   Michael Ruberto
• [sdiy] Question for Yamaha tech?   Ken Stone

Last message date: Mon Oct 31 23:59:36 CET 2005
Archived on: Tue Jun 3 23:31:34 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...