[sdiy] recommendations for bench supply?

[Harry Bissell Jr]

I think the MOTM power supply is current
limited... otoh that might be way too much power
for your circuit (might get hot)

I use a PowerOne +/-15V supply at 1.2A and have never
blown the supply with a mistake. It you monitor the
voltages with a meter, it will show you if one or
both of the suplies has shut down due to overcurrent.

H^) harry

--- Dino Leone <dino.leone at stanford.edu> wrote:

> Dear SDIY members,
> 
> My infant-SDIY experiments are approaching a level
> where I need a 
> bench power supply - I think I almost fried my MOTM
> power supply 
> yesterday...
> 
> Anyway, I would need +/- 15V and +5V and wanted ask
> if people could 
> make recommendations for an affordable, entry-level
> bench supply? 
> Maybe I would have to scrap the +5V in the
> beginning?
> 
> Many thanks in advance,
> 
> Dino
> 
> 
> 
>