[sdiy] Making holes in plastic

[harrybissell]

Tim Daugard wrote:

> I use a 1/32 inch pilot hole, expand that with a 1/8 inch drill and
> expand further with a reaming tool. The tool is available from RS
> and Mouser. It is good for holes to about 5/8s. For larger than that
> I expand with a Dremel tool with a routing bit. A file works also. I
> wouldn't use this method for anything commercial though.
>

Yeah, Reamer. I forgot. Iused to use that for everything. Its a real
good choice for plastic, as there is no heat buildup !!!

Good advice, Tim :^P

(step drill, if sharp would be OK as well)

H^) harry (now that I know its a TB-303, I'd like to re-suggest the 12ga
shotgun... :^)