[sdiy] Finishing Coatings - tips?

[Paul Perry]

----- Original Message ----- 
From: "Michael Ruberto"
> . I seem to remember somebody saying that the clear coat
> aerosols tend to yellow after awhile and I've heard also that when these
are
> applied to bare metal the result can be cloudy looking.

I have heard the 'cloudiness' is caused by moisture in the air condensing
out, as the expanding aerosol is cold. In a dry atmosphere, it should not
be a problem. (there has been debate on this on the DIY Stompbox board).

paul perry melbourne australia