[sdiy] tb-3031 knobs?

[Brett Maddaford]

Hi All
 
My TB-3031 has been finished for a while now but i am having problems
finding knobs that will work with it. i have used a few different types
and they have all come loose. I used the omeg pots suggested by tony
which have a smooth round shaft so all the knobs i have used have the
round hole and a screw to hold them onto the shaft. From what i can see
the shafts are just so smooth that any knob i have put on so far comes
lose pretty quickly and its drivin me nuts.....any suggestions on knobs
that work well with these omeg pot shafts?
 
thanks
Brett
 
Brett Maddaford

IPFX - Previously known as Performance Solutions

Tel: +61 9522 0500

Support: 1300 737 367 (Aus Only)

web: www.ipfx.com <http://www.ipfx.com/> 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20051130/61f9610c/attachment.htm>