[sdiy] What type of switch would this be?

[Jeff Farr]

Yes!  I've found that, the board layout is going to be a big help, if
you don't mind me using it 50 as a starting point.  Have you used the
75019 in a circuit before?  There are a couple things about the spec
that I'm not clear about.  With luck Analogue Solutions still has some
of these in stock.

On 11/12/05, ASSI <Stromeko at compuserve.de> wrote:
> On Dienstag, 8. November 2005 05:05, ryan williams wrote:
> > ad75019 is 16x16 +-12V supply and has 44 pins. serial interface. I
> > would not hesitate to solder this if I was willing to pay the 17$.
> > Actually I would probably pay it if I had something planned that was
> > cool enough to need one of these.
>
> I have an untested Eagle project that uses the AD75019 on my
> website (the description file has a few words on the issues of using the
> crosspoint matrix for CV switching).
>
>
> Achim.
> --
> +<[Q+ Matrix-12 WAVE#46 Neuron microQkb Andromeda XTk sonic heaven]>+
>
> SD adaptations for KORG EX-800 and Poly-800MkII V0.9:
> http://Stromeko.Synth.net/Downloads.html#KorgSDada
>
>