[sdiy] What type of switch would this be?

[ChristianH]

Or do it the Oberheim Matrix 1000 way - provide, say, 10 general purpose
modulation paths, each with a big multiplexer to any source, and an
attenuator. Each target only has to mux from those 10 modulation paths,
and you can link a modulator to multiple targets at once.

Chris



On Wed, 09 Nov 2005 08:38:58 -0700 Ian Fritz <ijfritz at earthlink.net>
wrote:

> At 11:24 PM 11/8/05, Samppa Tolvanen wrote:
> 
> >Would you like limited patching?
> >
> >Like, who would patch an osc to filter cutoff? Maybe even modulating
> >resonance? Maybe same time from the same osc?
> >
> >Uh, sorry. In my chart one osc has expo and lin freq. control + like 3
> >different waveform outputs. 3 of those will eat 15 patchpoints.
> >
> >And anyway, we'll need some neat VCA's or attenuators for each output, right?
> >
> >Bye, Samppa
> 
> I agree with this.  For my hybrid system I spent a lot of time figuring out 
> the most useful connections and then set up a switching system to implement 
> them.  Part of the patch setup is done with analog switches, to set what I 
> call the "configuration" of the system, and the patch is then completed by 
> setting levels in a set of several voltage-controlled mixers.
> 
> http://home.earthlink.net/~ijfritz/sy_cir1.htm
> 
>    Ian