[sdiy] What type of switch would this be?

[Ian Fritz]

At 11:24 PM 11/8/05, Samppa Tolvanen wrote:

>Would you like limited patching?
>
>Like, who would patch an osc to filter cutoff? Maybe even modulating
>resonance? Maybe same time from the same osc?
>
>Uh, sorry. In my chart one osc has expo and lin freq. control + like 3
>different waveform outputs. 3 of those will eat 15 patchpoints.
>
>And anyway, we'll need some neat VCA's or attenuators for each output, right?
>
>Bye, Samppa

I agree with this.  For my hybrid system I spent a lot of time figuring out 
the most useful connections and then set up a switching system to implement 
them.  Part of the patch setup is done with analog switches, to set what I 
call the "configuration" of the system, and the patch is then completed by 
setting levels in a set of several voltage-controlled mixers.

http://home.earthlink.net/~ijfritz/sy_cir1.htm

   Ian