[sdiy] Broken CEM3310?

[Louis van Dompselaar]

Quoting Oakley Sound  [11/03/05 20:24]:
>  From my experience this is a common failure mode of the 3310. You may 
> have something else wrong with your circuit, but my bet is that the 3310 
>  needs to be replaced.

Thanks.

Already found it though.  The CEV board has seperate inputs for gate and
trigger.  If you only use gate, it needs to be connected to both for the
ADSR to function properly.  A jumper wire is installed by default on the
CEV board, but that was missing from mine.

Louis