[sdiy] FS: - Doepfer MAQ 16/3 Analog Sequencer... needs repair

[nN AAt e e]

Hey List! since this isn't in ship shape, SDIY gets the first offer! yay!
copied and pasted from a post i made a while ago somewhere else, i says:

    " Doepfer MAQ 16/3 Analog Sequencer ... Rev. 1 blackface, so no CV out
and limited memory [i think maybe five patterns]. two plastic pot shafts are
broken [9 and 10 on top row], and one shaft is missing it's knob. the two
broken ones are still easily turned with a fingertip/nail and are marked and
have a groove for turnability. the two broken steps are skipped and are at a
fixed spot... you can have the top row be only 8 steps long if it's a
problem. i can get photo if wanted. here's the doepfer page
[http://www.doepfer.de/maq_e.htm] ... remember that it is more limited than
the current version, but most of the sequencing features are the same. i
have the manual for it, and can supply a generic wallwart for it. the v1
came out 14 years ago and i haven't found a single review for it online. CAN
be upgraded to v3 with a kit from Doepfer.  "

i've only used it for a little bit, but as far as i know it's working fine
other than the broken pots... i'm going to resolder the pots back on [i
don't know why they were taken off if the previous owner didn't replace
them] and see if it fixes those two steps, otherwise it should be pretty
easy to find replacements...

make an offer.

- nate... impulse buys really kill me in the long run :(