[sdiy] Moog Satellite Schematics...and Thanks...

[Tim J]

Paul and List,

That was just too freakin' easy of a fix.  I had tried moving them up and 
down to clean them out with no luck.  Wiggling them a bit side to side fixed 
everything.

Thank You Paul!

Tim J




>Hi tim,
>
>the satellite's tabs are notorious for corrosion; i'd
>say the first thing to do is move them back and forth
>about 15 times pretty quickly... and see if there is
>any improvement.
>
>if not, check the switches with a multimeter... you
>may just need to get some alcohol in there, and repeat
>the flickering.
>
>i just finished one a while ago which had many more
>problems, but the tabs needed this kind of treatment
>as well.
>
>-pdb
>
> > This past weekend I found a moog satellite at a
> > garage sale.  Everything
> > seems to work except the tabs in the String section
> > along with Bell and
> > Lunar.  I had a quick look inside and it appears
> > each group of tabs goes to
> > a certain part of the main board.  I was hoping a
> > connector was just loose
> > but thats not the case.  Anyone have schematics (or
> > suggestions...) for this
> > little beastie?