[sdiy] Kraakdoos line out & Capacitor Voltage Ratings

[Rafael_Cohen at prusec.com]

Hi all,

I just wanted to say thanks to all the responses and I will be getting back
to folks as I read through, I just wanted to get all warm and fuzzy (and
full of lead) for a second and appreciate SDIY... where else could I ask
all these questions and get a zillion responses within just a couple of
days!??!!?!

Thanks,

Rafael




                                                                                                                                       
              Metrophage <c0r3dump23 at yahoo.com>                                                                                        
                                                          To:                                         Ian Fritz                        
                                                           <ijfritz at earthlink.net>, Rafael_Cohen at prusec.com,                           
              Saturday May 21, 2005 12:41 PM               synth-diy at dropmix.xs4all.nl                                                 
                                                          cc:                                                                          
                                                          Subject:   Re: [sdiy] Kraakdoos line out                                     
                                                                                                                                       





--- Ian Fritz <ijfritz at earthlink.net> wrote:
> At 07:36 AM 5/21/05, Metrophage wrote:
>
> > > Are you saying that the added cap and resistors themselves do not
> > > hurt the operation, ie there is only a problem when the cable is
also
> > > connected?
> >
> >Exactly.
>
> Hmmm... Surprising, since another poster said he had gotten this to
> work, and it seems pretty well isolated.  Have you double checked the
> connection to the mixer (ground properly connected)?

The output is via a chassis-mount RCA jack, which is grounded. I used a
good RCA-1/4" cable to connect to a small Mackie mixer, which seems to
ground just fine. Maybe I should try to find a polarized 1uF capacitor
instead of the film one which I used.

CJ




Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
 http://tour.mail.yahoo.com/mailtour.html