[sdiy] Width of pins for EMS style patch matrix?

[mikei at marketbridge.ca]

CJ,
I have both types of pin here. The metal part of each pin looks to be 
1/16" diameter (or at least very close, judging by ruler). The shorting 
pins are 1.5" long, the metal part is 7/8" long, with a molded plastic 
handle. The resistor pins are 1 11/16" long, the metal part being 13/16" 
long, with the resistor hidden by a removable plastic cap. These were 
made for Sealectro patchpanels.
Cheers, Mike