[sdiy] Module format

[Paul Maddox]

Harry,

> Swap +5 and Dgnd to pins 1-2 and move everything down...
> this will allow you to skip these more easily, and keep them at
> the outer edge of the module is used... farther away from all
> the 'good' signals   :^P

yep, fair point..

Paul



> H^) harry
>
> Ken Stone wrote:
>
>> >Grabbing the bull by the horns so to speak, how about this for pin use 
>> >;-
>> >
>> >1 = AGND
>> >2 = +15V
>> >3 = -15V
>> >4 = AGND
>> >5 = +5V
>> >6 = DGND
>> >7 - 12 = Audio In (+5V to -5V)   Total of 6 audio inputs
>> >13 = AGND
>> >14 - 21 = CV In (+10v to -10v)   Total of 8 CV/Gate inputs
>> >22 = AGND
>> >23 - 30 = Audio Out (+5V to -5V) Total of 8 Audio outputs
>>
>> You forget CV out, unless you intend to have ADSRs, LFOs, voltage 
>> processors
>> etc using the Audio Out lines as well.
>>
>> Ken
>> _______________________________________________________________________
>> Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
>> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>