[sdiy] Module format

[harrybissell]

Swap +5 and Dgnd to pins 1-2 and move everything down...
this will allow you to skip these more easily, and keep them at
the outer edge of the module is used... farther away from all
the 'good' signals   :^P

H^) harry

Ken Stone wrote:

> >Grabbing the bull by the horns so to speak, how about this for pin use ;-
> >
> >1 = AGND
> >2 = +15V
> >3 = -15V
> >4 = AGND
> >5 = +5V
> >6 = DGND
> >7 - 12 = Audio In (+5V to -5V)   Total of 6 audio inputs
> >13 = AGND
> >14 - 21 = CV In (+10v to -10v)   Total of 8 CV/Gate inputs
> >22 = AGND
> >23 - 30 = Audio Out (+5V to -5V) Total of 8 Audio outputs
>
> You forget CV out, unless you intend to have ADSRs, LFOs, voltage processors
> etc using the Audio Out lines as well.
>
> Ken
> _______________________________________________________________________
> Ken Stone   sasami at hotkey.net.au or sasami at cgs.synth.net
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>