[sdiy] PRN Noise Gennie Question

[James Patchell]

I have done both...

http://www.oldcrows.net/~patchell/synthmodulesII/200-1021.pdf

In the above schematic, I use a 32 bit PRN source, and tap off 8 bits to 
run to a DAC...on this application, I did it this way so I could use the 
DAC output got generate control voltages in predictable sized steps....


At 11:54 AM 3/28/2005 -0800, Tim Ressel wrote:
>Hey all,
>
>I was wondering about a few details when implimenting
>a digital PRN noise source:
>
>First is sample rate, if that is the right term. At
>what rate do the new samples get generated?
>
>Second is the output. Do I just use 1 digital line and
>filter it, or should I make a little R2R ladder and
>use many lines?
>
>Thanks!
>
>-- Tim Ressel (on the verge of exiting lurker mode)
>
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! Small Business - Try our new resources site!
>http://smallbusiness.yahoo.com/resources/

         -Jim
***************************************************************
http://www.oldcrows.net/~patchell

***************************************************************