[sdiy] New Technology needing a replacement slider.

[drheqx]

I trashed a slider on my Korg D8 a while ago, but their parts supplier
was very good at getting me a new one. You will find the link below. 


You may have to call Korg first to get a part number.

Korg USA, Inc.
316 South Service Road
Melville, NY 11747-3201


US Customer Service (631) 390-6500
US Product Support (631) 390-8737

http://www.tubesandmore.com

heqx




-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl] On Behalf Of Graham Gleich
Sent: Thursday, June 16, 2005 1:07 PM
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] New Technology needing a replacement slider.

Hi, I recently got a Korg EMX-1 Unit, partly for the back lit tubes ;-)
har 
har, partly for its all-in-1 functions, but mostly for a toy to break
out 
from software. This thing for the most part works as advertised.

My only concern is that there is a slider in the lower left hand corner.

When you apply a little bit of pressure the slider will pop into the
board 
a bit as if its sort of loose or getting off track. Also the slider
doesn't 
quite move as smooth as it did fresh from the box. I am about 75 percent

sure i was the culprit of this issue. Has any one else had a similar
issue 
with this unit or is there a way to fix this? This unit still works fine
as 
its only about 6 months old, but as this unit is the one that i tote
around 
id like to try and keep it in top condition. I haven't opened it up or 
investigated the unit yet as its still fairly new and i am in the dark 
about what parts could be serviceable.
                      -Graham





___________________________________________________________
$0 Web Hosting with up to 200MB web space, 1000 MB Transfer
10 Personalized POP and Web E-mail Accounts, and much more.
Signup at www.doteasy.com